seal

Hi Guys.. Looking around I read a few guys are impressed by the Kawasaki fork seals for their Bergs. I recently purchased a pair of Seals from some where els (Pyramid Parts). But, after the install (a serious effort alone), before a single ride. They are showing signs of leaking oil over my...

Hi does anybody know if someboby makes a full engine Seal kit, for a 2005 fs 650e. I know they make full gasket kits but i'm trying to find a full seal kit ( crank seals, valve seals and so on). any help would be appreciated

Howdy folks, My first post here! I'm the 2nd owner of a 2009 FE570 and the bike came with a few extras, including an FMF Q4 can. The bike only saw some light fire-road use and I've been riding some slow & technical twisties so I put some DEI heat tape on the bottom of the tank and wrapped the...

The stock water pump seal failed on my bike at 3k miles. It's never been ridden in the dirt and the shaft was found to be grooved, so a new seal didn't fix it. Found Kawasaki part # 92049-0104 seal will fit and is 1mm deeper, moving the sealing area away from the damaged area on the shaft...

I just bought one. going to try since my stock shock seal only last about a year. any one have any experience with it ? Regards

Hi Can somebody tell me what size the waterpump seal is(bigger one)? I'm not able to find it in sparepart list :| Pic: Uploaded with ImageShack.us

Hi: I´ll make the story short. The water pump impeller got screwed (who knows why'). Which was maiking the water boil all the time. I changed the impeller with a new one. Once it was donde, I started the bike and coolant was coming out the water pump through the seal (another problem maybe...

A little more water pump seal information My 2010 570 started to loose a little coolant about 50cc after about 5months and 3700miles, just been adding coolant after every ride, I kept telling my self I didn’t have time to fix it, so today I installed the seals . Takes about an hour. Should...

Hi everyone, I had the waterp pump seals and bearing replaced by the dealer when they did the warranty cam. Now after 4 hours it leaks again, when I say leak it was more of an eruption. I was out by myself hitting a spot near town, when I turned back on to the highway I short shifted into 6th...

will a 10x18x6 (oem 10x18x4) sealing fit in the clutchcover or is it to thick?

All, Well after 100 hours the water pump seal started dribbling out the weep hole. I got the parts to replace it, clutch cover gasket, seals, pump housing gasket etc. The new seals do not have the metallic outer that the previous generation had, and the oil seal has little spacers on it to...

I just pulled down the motor after finding a part of a seal spring on my drain plug and black matter turns out to be the seal on the mains on the cam chain side seal is gone no damage apart from mess anyone got a idea why this might have happend? the bike run fine but was feeling a bit lazy low...

Just did a valve clearance and service and thought i would check the magnitic drain plug . It has what looks like parts of a tiny oils seal spring on it looks all most like the one from behind the weep hole bearing any idea's. This might be a clue or not the bike oil level was seemed to be...

Hi, Am I able to change the seal ring on the secondary shaft(behind the front sprocket) from outside,I mean without splitting the case?

I had to replace my water pump seal and now I'm not sure if I put the new one in the right way. (Installed it the same as what I took out though...) Still leaking from the weep hole now. The old one was installed with the "open" side of the seal facing away from the water pump impeller. I...

Hi there,any tips on replacing my front sprocket oil seal ?(2003 FE400E) 100hrs,

HI, My Berg is leaking coolant out of the weep hole. I have read lots about the Orangeberg seal kit, with everyone saying they work awesome. Could someone please tell me how to get my hands on one. Thanks

Hope all is well with everone; My 2004 450 FE kick start seal has been weeping for some time now. Need to fix Question: can the seal be replaced from the outside of the case cover or do I pull the cover to replace the seal

Hi All, Does anybody know if Orangeberg is still doing the seal kits?, I have sent him two messages but got no reply. I rang Dan at Motoxotica but he has sold out, does anybody know anyone else that my stock them. Regards Sparks.

I have had various issues with the standard seal arrangement leaking from time to time. I ordered Orangeburgs seal kit a while back and finally put it in. It went in very easy and after a couple of rides I can say it works great! No more weeping out the hole anymore! Highly recommended! :D