seal

Any of you had any luck replacing valve seals without pulling the head to compress the spring? Needing to do them on both our bikes. Mine (the wife) 09 Fe450, & his 16 Fe501s (husky). Basically looking to see if anyone has had success with the "on bike" spring compressors. If so, which 1's.

Hi all Got a 2002 FE650 that started getting a lot of oil coolant in the engine oil. Thinking I should replace the water shaft seal (maybe one of those fancy jobs Taffmeister has?). I was surprised when I took the clutch cover off, and there was another seal on the inside! Look at the pics to...

Good day guys: Husaberg 390 loosing mineral oil into engine after it sits for a week or more, I'm sure it will get worse in time. Does anyone have a part number for the seal on the oem slave cylinder ? or a recommended fix besides replacing the complete slave cylinder? thanks

Hi! Been searching to find the correct STEERING STEM BEARING & SEAL KIT for my Husaberg FS 650 2008. i have searched and found ALL BALLS STEERING STEM BEARING & SEAL KIT - part number 22-1032 , but previously I have swapped with a Husqvarna 701 SM, which had part number 22-1026 . I can...

Correct way to install water pump seal Hi everyone, I recently purchased a husaberg fe400e 2002 model. there's a bit of a water leak coming from the wheep hole. The guy before me had done a lot of work to the bike and had actually put a new water pump seal and in, after reading quite a...

My 1999 FE501 is leaking oil like a siv out of the kick starter seal, does anyone know the size off hand of it and the shifter? Thanks in advance

So, I busted a fork seal again after 1.5 seasons (WP forks on a 2010 FE450). Replacing with SKF seals this go-around, and also bought the SKF mud scrappers, as I mostly ride enduros in difficult conditions. Any tips on extending the life of your seals; stanchion cleaning routines and...

There are already several threads about this, kudos to the authors! Just thought Id publish the photos from this session. To change the water seal (ie if coolant is coming out the weep hole) its a fairly small job, it can be done without removing the engine cover, just the housing needs...

Hi all In the process of doing a head rebuild. I'm changing all the gaskets and seals. Question is should I use a case sealant as well? Sent from my SM-G950F using Tapatalk

Looks like I have a slight oil leak from the countershaft (output shaft). Behind the sprocket there's a spacer, O ring and a seal. Anyone know if the seal be changed with the engine in situ without splitting the cases? The OEM service manual isn't very specific. Cheers!

Does anyone know the correct name or even a part number for the oil seal that sit behind the gear lever as mine leaks when on side stand it a fe 350 2014 Thanks phill Sent from my iPad using Tapatalk

Sorry for beating the dead horse, this is my first post and a long one(sorry in advance). I just bought this bike last week went for 2 small rides and I was amazed how snappy and responsive the bike is, already in love with the thing but sadly also already having issues. The previous owner...

Somebody know we're to buy oil seal rings for a fe400 2002 WP forke. And maybe help me with articelnumber on the seal a need. :o:D

Hallo My bike is Husaberg FE650-02 and I wonder if anyone know the size for front Wheel bearing seals ? I still have the analogue speedo drive so it is two different seals for left and right side. (Axle size is 20 mm in diameter). Original part number 350009/350011. Thanks Robert

Have a badly leaking right fork seal. looks like about 3 OZ/90 ml has leaked out so far. Is there a step by step on how to change seals and oil? Anything with pics or videos as well? I cant find anything on you tube. Or is a better to pay $165 to have it done? I keep hearing that these forks are...

i will replace my leaky fork seal myself ( pretty handy guy), what specific tools do you need to do the job correctly and source . i believe its a 48mm for for my 2014 FE 350 your input please Webfoot

So, going in again to change the pump seal and have a question about how deep to send it into the cover. Do I need to only drive the seal until it's flush with the cover, or until it seats against the oil seal? Last time I did this, via 3 seals later, I managed to seat the seal flush with...

hello! First oil change after rebuild revealed a little grey oil. My guess It's the waterpump seal. Because it deformed a little bit while i installed it. It was a really tight fit and the metal seal was a little bent. I'm wondering if its possible to use ktm water pump seal. Dimension of my...

I have a quick question. The seal # 60 in clutch cover goes with the spring facing water pump and the inside spring facing crank or towards waterpump?

I changed water and oil seals with new ones but oil still coming from weep hole. Bearing has two sides so may i install it wrong side? One side of bearing has an plastic so which side i have to put oil seal? Thanks.