rear

hi... I want to put rear wheel from ktm 690 sm because it is 5.0 rim to my husaberg. do you know if it suits the hub without patent? thanks

Currently I have 13/42 sprockets on my 570. After dropping the front from 14 to 13 it still runs high. Riding tight single track, it seems like first is too low and 2nd is too high. My plan is to purchase new sprockets and chain so I would like to make sure that i get it right. I'm not...

Hi all, Just recently i've noticed a crack in my rear rim around one of the spoke holes. The wheels are the factory Saxess Tubeless rims by KTM which i think are made by Behr. What are my options in replacing this rim? i'd like to keep using a tubeless style rim and re-lace using the...

hi fellas. bike : 2014 Husaberg FE450 (anniversary edition). current setup : off road wheels. project : want to fit a set of KTM Motard wheels . Wheels obtained. Problem : the 5 inch rear , when mated with a 160 sized rear tire , contacts the chain. Is there some kind of technique...

I've noticed that my rear fender had snapped, so I made up some brackets made from some aluminum laying around my garage. The rear fender is now much stiffer and stronger. I have also been converting my bike to be road legal, to fit Ontario standard. Have a look at the progress.

Hello everyone! I own a FS 550e from 2007 with both original sprockets — 16T and the front and 38T at the rear. I'm struggling to find some new sprockets (the rear one preferably in black or gold) for this same measures. Also, I've heard some people saying that the sprockets from the...

Hi,Im having trouble sourceing 19 inch rear tyres for on road,so am considering changing my rear 19 inch rim to an 18,can this be done?Is there a certain rim I am looking for or can I get away with something common?Also can I then get the 19 inch rim re-laced onto the front?Any advice would...

Hi All. I have a Husaberg FE 390 model 2011 and I want to install the rear turn signals. I already have the signals from a Kit that I got from a KTM 350 Freeride and I have already installed the front ones I have not been able to install the rear ones, because the rear fender support...

Hi I notice some play in the bottom rear shock absorber fastening. My guess is that the bottom bearing is shot. I have removed the bottom bolt inside the swing arm and the top bolt. The bottom end of the shock is somewhat stuck in the swingarm. So my question is Is there something else that...

Hi guys I have a fe501 /2003 and have taken all the starter kit off now so kick start only ,and now when I have bike on tick over lights are good but when I rev the lights go dim ,but thought it would be round other way they get brighter ,I rang my local garage and they said it's the...

Currently running Pilot Powers and the rear is starting to show signs of squaring off down the middle and am wondering what is a good replacement? i would love to use another michelin but it seems all the newer tires only come in a 150/70/17 rear and not the 150/60/17 that is fitted as standard...

Was discussing how DR-Z's handle over on Thumpertalk. A guy there had had a 50+ RWHP build iirc, sth. like 470cc. (The DRZ motor can be built to put out very nice power (and still be reliable)) Guy said it wasn't great in the dirt as the bike wanted to spin round and put the rear wheel out front...

Hi guys I've just bought a 2004 fe450 and love it but only problem I have is I'm 18st and need a rear spring to match my weight...ktech have told me I need a 63-250-100 but the manual states that my spring should be 260mm so was just wondering if any of you guys could help? Regards Ronnie

Hey folks want to get spare wheels for my '08 550 Questions: From what I have searched and read here, KTM sets from '04 on will fit Correct? or same on the parts if I wanted to go build my own KTM - hubs, spokes, rim sets etc? Thanx !! HR

There's a TE 300 for sale locally. In the ad, the bracket for the rear light and blinkers isn't attached. In case the owner is interested in selling it separately - would it fit my 570? The black thing in the attached pic.

I've been looking for flush mount replacement turn signals for my 2011 FE570S, and have found the Sicass Racing "Orange Lens LED Flat Mount-KTM" PN 22-100C. Here's a link: http://sicassracing.com/store/turn_sign ... _mount_ktm Has anybody tried these, and if so what do you think?

I saw one for sale just a few weeks back? was it on UHE? regards Taffy

hi all my rear brake rotor guard got bent and the clearance from the rotor is 1cm now. Anyone tried to repair the guard. Should i get it out and try to get it in its initial flat form? I am worried about its strength limit. Thanks

Hi all , I have had my 09 570 since new , been faultless with now 110 hours . They are the best dirt bike every made without doubt . Anyway enough patting myself on the back . I am having my first real issue in that I have bought a new genuine rear fender to replace my tatty original . I don't...

I've had a couple flaps wear through due to higher speed road riding. I bought a Cycra rear flap and it turns out to be made of plastic rather than the rubber KTM uses. I thought I got screwed, but turns out the flap works like a charm and doesn't flap around. It does exactly what you expect...