rear

im in the process of buying a 2011 fx 450 and my kids love to ride with me but the new bike has no foot pegs for them and I can't really see a place to mount some is there a after market kit for rear foot pegs. Love the site.

Rear bake worked fine the last time I rode my 2011 FE570S. Now I've got absoluteely nothing. I tried conventional bleeding, a Mighty-Mite to draw fluid through the line, a synringe to pump fluid through the line, and nothing. I can't get the thing to bleed. Help.

All, I have a 2010 FE450 and it seems when we get back from a muddy ride I am the only one who can barely get into my backpack since it is caked with mud. My brother and the rest of are on a Honda, Suzuki and a Yamaha and they come back much cleaner and dryer than I. Now I dont want this to...

The rear fender on my 570 is constantly flapping up and down. This is bad enough that all of my riding buddies have stated it looks about ready to fall off. It isn't, it is tight and simply bendy right behind the seat? Last weekend, the taillight lens broke loose and disappeared leaving the...

Hello everyone: ). Just changed the oil 2 hours ago. OIL: Agip 5w-40 racing Lately when engine was warm and was driving...geared down and holded clutch lever down, it blocked the rear wheel, when the speed was lower, if then wanted to leave on 1st gear, it made kinda like metallic bad voice down...

hi im after some advice i have a husaberg fe650 supermoto 2003 and i need to adjust my rear shock never touched a rear shock before what i have found is my rear wheel is touching the exhaust from time to time must be when its wheeling so i need to firm it up abit ,i have already tightened the...

Hi I have been using a oem 48 tooth rear wheel sprocket on 2008 berg. I noticed cracks in it today from middle of a tooth down. By the time I got back to trailer another crack about 1/3 of the way around the sprocket had appeared. The second crack may have been caused by the flex from the...

My turn signals lasted all of about 10 seconds into my first ride before the supporting plastic broke and they fell off. And it appears the rear brake light is also too heavy and starting to crack the supporting plastic. Wondering if there are good options for a 2011 FE570s that are lighter...

Anyone know what the HP at the rear wheel is for a 2002 FE400? I would guess betweeen 35 and 40. Greg

Anyone put on a larger step plate for the rear brake? I find the stock one is a little small, sometimes its hard to find when you are in a hurry.

I have both a 97 and 99 FE501 and I'm wondering why the engineers did away with the rear suspension linkage on the newer model. In comparing the two side by side the newer (linkless) version is obviously lighter, less prone to wear and cheaper to manufacture. But...is it better? Was the change...

I thought I would post a couple of pictures of my newly installed "get out of trouble" fuel pods on my 570. I figure the fuel these bottles hold should give me about 15-20 miles extra fuel for those situations where the ride is a little longer. I didn't want to install the subframe fuel tank...

will a CRF rear brake lever fit a 03, with a bit of adjusment :?:

Hi, quick question, searched and couldn't find an answer. I Have a 2012 FE390 the rear's fitted with a 140/80 with an 18" x 2.15" rim I recently purchased a Ultra Heavy Duty tube for the rear but the tube has 110/100D - 18" written on it. Will it still fit? do they make tubes 140? or is it...

Hello everyone I'm new Berger from Taiwan. Husaberg's bike just launched in Taiwan in 2011. so this brand is new and so mysterious to our people... I want to buy a 5" rear wheel which is on Husaberg official force-part manual for my FS570 The part number is 5841000144430 The manual have...

Just found out the hard way that a BT-090 rear in 160 width does not fit the '05 FS model, even with a 5 inch rim. I tried to trim down the edge due to chain rub and swingarm interference, but screwed up the bargain priced tire in the attempt. Has anyone fitted a BT-003 in a 160? I'm thinking...

I've been able to test a 2010 FE570 shock against my 2009 FE570 rear shock. upon investigation I found that my shock has FX shimstacks in there but not the bottoming needle seen on various KTMs from 2010 such as the SXC, EXC and SX. the FE is great and no complaints till you're in a rush and...

Hi guys, on my blog i just posted a series of pictures of the new rear 15 litres Safari Tank. For the Dakar i will use the front and rear Safari Tanks kit, i used them this year in the rally championship and always worked great and also after my big crash in Australian Safari they showed that...

I'm looking to identify the plug under the ecu that is for the rear indicators, the previous owner removed them and now I want to put some aftermarket units in. Normally they would be easy to identify as I would expect a 4 wire plug but I can only see 1 x 3 wire waterproof connector...

Hi I'm new here so take it easy on me....... This is the first Berg I have owned and I'm not entirely sure of its history. Anyway its an FE400E 2002. I've taken off the rear brake pedal as the return spring wasn't returning the pedal, it was relying on the piston to return it. I have tried...