rear

Hello all, I currently have a 45T sprocket on the rear of the '05 FE. I went to put a 48T (or was it 50T) on the rear, but it didn't look like it would fit at all with the chain guide. The chain guide also appears to be adjusted to its "largest" setting. What is the largest rear than can fit...

Hi Guys, Im in Melbourne Australia, I need a rear fender to suit my FE 570, I would be happy with almost any colour, does anyone have any idea where I could buy one from.. My local dealer tell me if I want one it will be on back order for the next 4 to 6 weeks.. Happy to pay cash..

Looking for a rear hub or complete rear wheel for 2000 FE501. Anybody?? Mike (mhambone) [email protected]

Hi looking for new rear mud gard and tank rad gard decals can they be got Easley ?

I haven't found a rear rack for the plastic subframed Husaberg/Husky/KTM's. Any thoughts?

Need help finding a black rear fender/number plate for 2004-2008 fs. Many sites list it but all say discontinued after placing order. Any suggestions?

good day bergers . i just bought a 2000 FE400e , trailed it on Prairie SVRA.. i felt young again.. speed and everything is heaven..but the rear shock is busted.. Rear was bouncing everywhere.. Has anybody have a manual on how to rebuild the wp pds? thanks

Is my 2005 650 supermoto made with a 5" rear rim from the factory or has the Former owner replaced the standard rim? I have trouble with Chain rubbing my 160/60 rear tyre and rim. Can you recommend a narrow sport tire for use on public roads size 160/60? Can i fit a 150/60 on a 5" rim or is...

So my sag isn't set correctly, hardly has any sag, standing sag is 10 mm, so i went top adjust my rear spring and it is too small so i cannot increase the sag, where do i go from here, will i need a new spring, how do i tell the size etc etc thanks :unsure:

The rear fender on my fe450 was damaged pretty badly when it was stolen. Luckily I got it back, but it was broken. Anyone out there have any extra rear fenders, license plate holders, etc that you are looking to get rid of? Thanks

I have just replaced the rear wheel bearings on my 09 FE450 and found that the rear hub spacer appears to be to long and the bearing that doesnt have the circlip cant be pushed all the way in until the outer race bottoms out in the hub. How do I know that I havnt put to much side load in the...

KTM / Husaberg D.I.D Rear Wheel Ktm / Husaberg 18" rear wheel. D.I.D rim with stock hub. Is showing a few signs of wear and has a few chips and scratches on it but from what i can see it is straight with no cracks and dints. What you see is what you get. This wheel came off a husaberg FE570, im...

Have fe570 does any other shock from a ktm or any other bike fit,my shock is set up for supermoto and want to do some enduro in off season but to much hassle and cost to get it redone for enduro ,was hoping to buy, another shock and just switch

I’m having trouble taking my rear break apart on my FE 450 -10 My calipers are no longer floating, one of the metal pins/rubber bushings are stuck. I’ll attach a picture to show where the problem is. What’s the best way to fix this, I cant get it apart…

Hi all, I have been using the STD spring (88/250) on my SM which is rated for a rider fully equipped being 70-80kg, I am closer to 100kg fully equipped so have had the spring preloaded probably more than it should be to get my ride heights right. I have the opportunity to try a...

Hi all, What is torque spec for rear sprocket screws, can't find it in 2003 manual. If it's M8 10.9 it can go to 33 Nm, right? Thanks

Hi there guys, I am looking at heavier springs in the front and rear of the bike. I have just noticed I have a rear straight rate spring from a 2004 berg sitting here which is a WP 81-99/260. This 2004 berg spring is 10mm longer than the KTMs or the new berg 2014 spring. There appears...

I've been able to match the front rotor with ktm parts, but the rear I cannot find a match. I'm hoping to find a good non-oem alternative (such as Tusk or braking) but can't seem to match it up. Anyone know if there is a KTM equivalent? I realize the rotor is on the opposite side, is there a...

My rear shock wp pds is damaged and the reservoir has been rubbing . About 3 mm corner has been taken off ! Anyone else had this ? Anyone know where i can get one ??

Hi I am looking to purchase a stock rear wheel for a 2009 FE 570. I also looking to find a larger capacity fuel tank and a used seat or seat pan. Thanks, Jeff