question

having trouble finding parts locally Before I start looking for long distance orders. Anybody know what years KTM carb Jets can be used if any?

Hi, Have recently purcahsed a Fan kit for my 2012 FE390. I've read the instructions, what i wanted to know is does the Husaberg radiator need to be removed to fit the fan kit, or can it be installed on the bike. If it does need to be removed can someone tell me the best way to remove it and...

well I bought my first husaberg, i have been riding ktms for alot of years an found a used husaberg cheep. it has a the wrong carburator and backfires on startup. once started it runs great but seam rich. I want to go back to the correct carb and check the valve adjustment. so what carb should...

Hello, My first post here so Hi to everyone. I posted this on Thumpertalk as well but thought that maybe some people from around here don't go there very often. I am sorry for another "which one" thread but I am interested to know what you think. So, let's cut to the chase. I know it would be...

I took home a 2011 fe570s my dealer remapped the bike stating he put in the same map as the offroad versions (I am guessing he remapped to euro spec or something). My question is.. which default map was remapped? If is put on a map switch which map will be the remapped map from the dealer and...

I was wondering if there are other slip-on exhaust cans out there that people have found that fit? Thanks

Just bought my first Berg on tuesday.It's going to be a project engine.Looking for parts fiches or diagrams of the engine and related parts.It's a '95 FE350, the engine has no spark and I'm not sure of what all it's missing(got it in a basket case).Are the parts available for this bike and where...

I'm checking the valves on my 2005 FE550 and am taking off the ignition side cover to turn the rotor to TDC. How much oil will there be in this side cover? On other makes of bikes I've had there has only been minimal oil on this side with it coming through a weep hole, so you didn't need to...

My first Husaberg, 2011 FE 390, came with 52 tooth rear sprocket. Not sure if its just me but seemed second gear lacked a little zip right off the bottom in the slow going stuff. Should I add 1 tooth to the rear sprocket, make it a 53 tooth or would I even notice this ? Also my front...

Hello, I just bought a 2011 FE 390 and did not have time to go over it with the dealer, had to get to work. I have no idea how to charge the battery and can't seem to find it in the manual. Is there battery post that are located somewhere other than on the battery itself that are easier to get...

Hello fellow Berggers, I own a 2011 FE570. I have about 12 hours on the engine, it is still under warranty. I have a set of knobby and motar wheels. I've done 11 hours on the motar setup mostly on the freeway doing about 70mph(easy rides). I converted it to the knobby setup and ran it for an...

hey guys, i have a 1997 fe600e, it has a #7351 40W/45W headlight that is better than nothing but thats about it. for electrical loads i have two 4"x4" cooling fans that draw 1.7 amps total for both, and a tusk dual/sport LED lighting kit( brake light and turn signals) and added jumper wire...

Ok long story short, I just picked up a 97 501 from a guy who owed me money. He was moving out of state so he let me pick it up before he left. Ive seen the bike run about a year ago, and all he said it needed was a battery. I replaced the battery, and tried to start it. It sounds like it has...

Hi all, I need to replace the cam on my 2004 FS650 motard as it is very pitted. The cam that has come out of the bike is a 08 3/3205. The engine is completely standard, and runs the full Ti Akro exhaust. The bike is used for race/street use and I like the power delivery it makes. My question...

Hi, I am picking up my new '11 FE570S on Saturday. Pretty stoked about getting this new bike. I am trying to find info on removal of the carbon canister and any other smog related crap on these bikes. I did this to my '08 WR250R and there were quite a few parts to remove and the process was...

When I got my 2002 FC550 it wouldn't shift into neutral with then engine running... I know, I know... it's normal, sorta! So, I ordered new friction discs, new steels, and a new clutch hub and outer basket almost a year ago now, the old drum and basket were grooved pretty good. When I went to...

Hey guys would you happen to know what size nut the rear spindle nut on a 2010 husaberg fx450 is? I'm assuming they are the same 09-11 on all models but I can't find the size and i'm heading to the store I think it may be a 26mm. Thanks for the answer in advance :)

Hello All! My name is Mark, and I live in the beautiful Keystone State. For our foreign counterparts on this board, that's Pennsylvania! Anyways, I joined here to get some information. Here in Pa, we race 270cc micro sprint cars. We run mostly 92-01 honda CR250's bored, stroked, ported, the...

there is hid xenon kit on my husaberg and im a bit confused because its connected right to H4 socket. i havent ride the bike yet because it was in project stage when i bought it. Few questions, wich should i choose; -does it work because light circuit is 12v AC? -if i disconnect the red wire...

Hi all!, I'm a bit confused about the shift drum in a 501FE 1996 engine, it's a 6 speed gearbox, but if I'm not wrong (which I probably am! :D ) I can only find 4 unique positions on the shift drum + neutral. (The bike was unable to start after a "repair" and sold) After the 4th gear in the...