Hiya!
Sorry in advance, I know this is going to be a long post, but I'm just trying to get all the info in here :D
I kinda recently bought myself a Husa FS650e with some problems on it, that I thought I'd fix. I've just got it back together again, and now it won't start. When I first got it...
Hi,
Early this year I purchased a new 2013 Husaberg TE300. The bike is great, but I have one big problem..
The front forks in my bike was starting to act poor, and it was discovered by the dealer that something broke inside.
I was promised all new internals in the forks. This happened in early...
So I have a 2011 FE 390 my problem is just on the last ride I stopped and pulled over with the group, then I went to start the bike and take off the bike started and then couched and stahled I tried to start the bike again and all it did was turn over almost like it was out of fuel. I know it...
Hey guys, some of you may remember me a couple years ago having a no spark issue with my 99 501 well after giving up on the bike and spending alot of money on new parts and a rewound stator from someone on here, i finally got back to tinkering with the bike after getting some new used parts it...
I've spent a lot of time and effort insulating the gas tank, putting fans on the radiators, etc. Still had boiling gas problems on steep slow climbs. So I bit the bullet and went the exhaust route.
After 3 months, no problems. Let me know what you think.
[attachment=1:2rmw5b94]new...
Im going to try again this weekend. I have a 2001 FE501 as far as i know it is standard I onlt picked it up earlier this year. I need to get the rear shock off for a rebuild (leaking oil down the 'shaft')
A while back I poped the caps off the swing arm, Cracked the nut wound it off a few...
Right boys finally got bike back up and running after buying a very nice second hand lump anyway dcr fitted it all for me( top fella) but when I got home put starting motor in and connected all electrics up and nothing??? So bought a new batt connected it all up the starting motor turns then...
I am working on getting a 02 fe400 back to running. the engine is back in the frame and everything is going good. Few things.....the choke, where does is attach? and the manual decomp is hitting the rad, just a little but enough to be a problem. and one take come pics of there bikes to help me...
Have an 11 fe 390 with the full fmf exhaust, the dealer has giving me the lastest mapping after i complained about a stalling issue on the trails when the bike gets hot. it still stalls ! but starts right up. any one have the fix?
I recently purchased a 2001 Husaberg Fe501e but am having problems starting it with the kick start. The battery runs flat very quick even if only holding the starter for a couple seconds to stat after long rides. It also seems to stall every time I stop. Was wondering if there are any good tips...
Hi guys, long time:
Ok, I have a new FE450 2012. It has 15 hours.
Yesterday went for a ride, and started to loose power, then started to backfire, then stall a bit and then stall a lot until finally wouldn´t run.
Call my mechanic friend. We thought of a fuel delivering problem (fuel pump...
Pls can anyone advise me on problems im having with my clutch, i have a 2003 501fe..
I cannot seem to get the clutch lever to work properly, there seems to be air getting into the system with the clutch working at the start of a ride and going to spongy to not working at all by the end of a...
Loving my new 2012 FE570, I did a pile of googling for known issues and mods required for a new berg and thought i'd just list everything I found here to save a bit of legwork for anyone thinking of buying one of these awesome bikes. Hope no one minds me rehashing stuff they have already posted...
hello !
have mouted some FS front dampers on my 650 2002 , now it sems that my wheel axel (20mm) is to smal .
what have i missed ? is it any adapters or somthing ?
regards daniel
Went for a ride yesterday and my bike just started not delifering power trough the gears. It was as if i cant get enough fuel because when i stopped the exaust from the engine was red hot. So i replaced the fuel filter in the tank and tested the pump presure and it was right, still the bike isnt...
1. i find that when sitting the rear brake pedal is too high, but when standing it is too low
2. when i fall off and the bars contact the ground, ie if i loose the front, that the suspension forks will twist in the triple clamps resulting in the front wheel pointing in the wrong direction. so...
Hello chaps,
ive got 2009 570fe, the last week or so its been struggling to tick over on idle, stalls after 20 seconds or so. I went to adjust the Idle on the choke, choke pushed in, but it dosnt seams to make any diffrence what so ever wether I turn it clockwise or anti clockwise.
Any ideas...
09 fe450 with approx 100hrs on it.
bit of a mare to start from cold, sounding like fueling issue?
and hesitant to tick over without throttle for the first minute or so and drops out without any warning now and again?
any ideas please, ive not had the bike for long, trying to get my head...
I'm new to Bergs and know very little about them and what can go wrong with them, things to keep an eye on and any service or performance tips would be appreciated.
My Bergs a 02? 501 and under the belief it could be a 650 kitted engine, is this posable?
Hy Folks...really need some help here
I own a Fe 390 (2011), with +-1200km.
2 last times i went for a ride it happened the same issue: after ridiing for 20/25 minutes, i stopped (engine off) for a little chat about the trail with the other riders (no more than 30/45 seconds), and when i hit...