problems

The problem I'm having with my 2000 FC 501 is starting it, when cold it will start within 3 kicks usually, and it seems to run really well, but when it gets warm once you kill the engine, it seems to be a real pain to start again. I have already adjusted and checked the valves clearances more...

Hi all just purchased a 2012 te300 getting it road legal here in the uk but have a few problems first up is the electric start doesn't work thought it might be battery so hooked up jump leads and nothing just a clicking on the relay thing next to the battery checked fuses both ok,next up is the...

Hey again guys! I find myself in need of some advice from more experienced people here. A while back I noticed that my electric starter would slip now and then. It would pull the engine over a few turns then spin freely until I let go of the button and tried again, or tapped it a few...

Hello, I recently bought a 2002 year Husaberg FE 501 and when I pulled the clutch cover to check for the source of leaking oil I noticed that the cam chain had made small scratches into the block. It seems that the harder I push on the chain tensioner blade the closer it moves to the block. I...

2005 FE 450 still having e-start problems. Changed out autodecomp spring. New battery, new starter still will not start on the button. Engine turns when you push the button but only half way around then bogs down, turns then bogs down etc.... Out of ideas. Need help or it's going up for sale...

Hi All, I have a 2012 TE 250 that's always been a gem. Runs strong no matter where I run it, desert, mountains, sea level, 5k feet, no matter, starts and runs like a monster. Went for the first ride of the season (california season doesn't start until rain) on Saturday and the bike didn't...

Starting problems 570 2010: Camshaft Looking to solve my starting problem on my 2010 FE 570, the only option left I think is a new camshaft (decompression). Of course I checked the valves, wiring to starter motor and relay. Replaced the battery. But still the cranking sometimes stops in the...

Hello everyone I'm new here and not really strong at English I have a Husaberg fe 390 2010 And have a clutch problem when I log into first gear clutch is not so good and the bike separates retrograde forward with you to help even have a video I would be very happy Thank you all and sorry...

Hi all just a quick query how much would a 02 650fe supermoto road legal be worth in uk thats just had £2000 spent on it to get it running and it only bin run about 6 times not rode just started and now im back to square one it will not start ,i cant see a spark in that bill included a new...

Hi its my first time on this forum. I own a 2001 Husaberg fe501 which I have had for 10 years. I recently dusted the old girl off and decided to start riding again. The problem is that its very hard to start. The button was never great so I havent worried about that but it always kicked over...

hey, new too both the forum and bikes , havent been riding for ten years, last one i owned was a moped so alot has changed since then :-P so here is my problem, i cant get my clutch to work, i have put new wear plates in it , new oil, backbled it , no clutch, I can pull the lever and...

Recently I purchased a FE570 with only 6 hours. As I do a lot of remote trail riding I w,anted something I could count on. With the bike being like new and having fuel injection, I assumed it would be very reliable. I've now taken it out 4 times and have had to be towed 3 of those times. The...

Howdy, I previously posted about a non-starting 94' FC600 I bought and my troubles with starting it. Since then, I have made alot of progress, but I am still far from a functioning bike. In order for me to get this bike to start originally, I had to adjust the valves, thoroughly clean the...

I have about 130 hrs on my 2011 FE390. Recently after shutting the engine off while on a ride the bike would not start back up! After sitting for about 10 minutes it fires up. This has now happened twice. It runs fine but when I shut it off it won't start back up. It turns over fine but seems to...

hi, i have an 01 400fe with a 501 engine in it ... the bike will start on the first or second kick always but i cannot get it to start on the starter motor ... heres what ive tried so far. all by following the manual fully charged battery, set ignition timing to factory spec ..set valve gaps...

I think I need a new stator on my FX 450. The battery will run down after a couple of hours of riding. New battery with full charge. Battery reads 13.5 volts when bike is started it drops to about 13.2. When revved it drops to around 12 volts. I checked voltage on the three wires coming from the...

Hope some one can help me. the control unit has suddenly stopped working on the speedo, It does nothing, any ideas??

Hi there new to this site, I have an fc501 1999, although difficult to kick start, I have always got it running, went out doing green laneing yday, no problems in running it never skipped a beat, but since I switched it off it won't start! Might sound silly, if it's low on oil would it not...

My throttle is opening about 1/4 at times and then 1/2 and then it's fine then for some time and then it plays up again she is an 08 berg with 6000 km up and new throttle cable about 1000km ago. is it the carby throttle valve about to fall apart :?

Hello I just bought Fe 650 and previous owner messed with kickstarter so it was jammed. I removed assembly and there was little damage caused by wrong fitting. I tried to re-install assembly, it seemed fine before bolting clutch. Kickstarter gear moved freely both directions until lever was...