problems

Hello i have got a big problem. My 501 1998 doesn't start again when I stoped it when it's hot. I only can start it, when I open the main screw of the carburetor. I need help Thanks

My 03-FE501E doesnt seem to be charging the battery. I have 12.6v at the battery when not running, and basically same volyage when started and reving. ie no detectable voltage change. Both yellows of the stator read from 10-50+ V AC the higher the revs the higher the voltage. The red...

Hi there m8:s wondering if there is any way to measure the ignition coil and look for ohms or anything else, i know my stator is broken but want to eleminate the ign coil as trouble. And my kicklevel is strange, its going almost halfways down before somethings is happening, is there anyway to...

I had planned on riding tomorrow, but just discovered that my radiator is leaking somewhere. must have damaged it the last time out. anyone know of a good repair shop i could send it to?

I and other Husaberg supermoto racers are experiencing warped steel clutch plates frequently. My bike is an 03 650 Supermoto. Has anyone a solution?

Hey guys, Have any of you experienced premature starter disengagement when cold? (NO, not "PE"!) My '05 FE650 starter has begun kicking out WAY too early...even before it gets past TDC. This now happens at least 5 to 10 times before the engine finally kicks past TDC just enough to start...

hi guys,my name is paul and i am from Greece. this is my first post and i hope that anyone of you would be kind enough to help me. i own a 95 fe 600 sm which has an 38mm dellorto vhsb. it runs great but has a significant problem in starting when the engine is cold and the enviroment's temp...

:? It wasn't that long ago that i was on this site trying to solve problem starting. Well, this time, my problem is just with the button. I don't use the button from cold (mainly because the engine will hardly turn with choke on, even off a car battery) so I kick her off instead, usually she...

Hi. I have just put back together the engine of my 2001 FS650e and now I have problems to start the engine. I went through "Hard starting guide", except measuring the electricity. I have checked: - valve adjustment - ignition (marks on ignition cover and rotor) - spark (sparking...

2002 FE501E Upon inspection at teardown, appears piston is contacting driving shaft counter balancer gear. New piston installed and have contact at same place between piston and gear on end of shaft. All bearings checked for play and appear in good order. Anyone have any experience with this...

:? I own a 2002 Fe 501 which starts great on the kick start but will not have it on the starter motor, it turns over fine but just won't start. I have been told that the carb, auto decompressor and valve clearences have to spot on, is this true? I am worn out after ever ride now, must get it...

Hi, I hope someone can help me. Maybe one of you made some experiences with the kokusan ignitions. I have got a problem. I adapted a kokusan ignition from a KTM 520 exc to my 2002 Berg. It worked really good for 5-6 hours, yesterday on a race it failed. I think it has to do with the...

After a cam bearing failure...now I got a trany problem. Where I can find something about this problem? Thanks again

Well as some of you know my new Husqvarna's starter would not work, hit the button and just went click, :( well traced power and it was ok, took starter out and ran power direct and it ran, looked in at the gears on the starter clutch and the first row is stripped out 8O don't know what caused...

hi guys sorry to go over the same old ground but i got a secondhand 650 fee on saturday and it s being an arse (old yorkshire saying )when its cold it will kick off ok but touch the button and the motor turns but doesnt attempt to fire but when its hot 2miles plus running it will start on the...