problems

hey hey i was out riding my FS650e 04` two minutes ago and from one second to the other it stoped idling it just dies when i let go of the throttle it spins fine put it cant idle anyone tryed the same...? David

hi everyone, I have a 2001 fc470 with a full doma system (apparently) when i first got the bike i had trouble when i gave it full throttle, it had 32 pilot, k35 needle, and 185main. left the pilot as it starts and ticks over fine, dropped a k51 needle in, and upped the main jet to a 190, then a...

I got this bike home today. Bought it as is for a too good to pass up price. I had no pressure on the clutch so I tried to back bleed it and it will not even push the smallest ampont of ATF fluid through. I had the resivior cover off and the bleed nipple cracked open and checked the hole in it...

First of all I like to apoligize if this subject has been covered before but I've searched the forum without any luck. Here goes: I've owned my FE600 -00 since new (it's a FC600 actually but I've converted it), it's all standard and I haven't even tuched the jetting so it has always started on...

Hi everyone, in this case i was so unfortunate i bought a very poorly looked after 501, in which case it needs a new cylinder since it has worn trough the nicasil coating. So I'm wondering where its cheapest to buy one or a cheaper complete bog bore kit is available? Chris:)

Fitted an 41 Fcr to my 2002 650 Husa, but am having starting problems now. I got it started fairly easy, but it dies every time after a couple of seconds, if I touch the throttle it dies immediately. I've played with the idle screw from min to max with no difference. I finally kept it...

This summer there was a while that I didn`t use my Husaberg, earlyer this seson the bike went just fine without any problems. But when I was going to go for a spinn in august, the bike didn`t start. The bike had been standing for like a month. I checked the plugg, and it gave sparks when I...

I rode in the 77mi. little burr vintage race yesterday. was considering the 200 mi race today so I wanted to check out some of the trails before deciding. My 99 fe400e wasn't the newest bike there.....LOL. 55 mi. into the trail the bike just dies, will not restart kicking or button. battery...

Hi Everyone, I took my 2005 FE 550 E for it's first ride (with me) last Friday to the Watagan's (Central Coast of NSW, Australia). It went really well and definitely had a lot more poke than my 2002 EXC 400. However, there was this one up hill section (around 100 - 150 meters long) that was...

Okay, sooooo, I think I might possibly have a problem (huh?)....Anywayz. went for a ride this weekend, I noticed that on the big 650 I tend to work the living **** out of the clutch..... early in the morning.....start her up....NO PROBLEM....slip into gear...NO PROBLEM....and as i gently...

hi alll you bergers got a fe 501 elduro it was smoking alot ov white smoke but runs great ! try stem seals/ head gasket and rings still smokes any ideas thanks also iv got another 501 with the sem leckys naft so i swaped head and barrel and it doesnt want to run it just back fires every now and...

I ride about once a week, whenever i take the bike out for a ride, the clutch doesn't appears to not be working 100%, i kick start the beast and then the second i slip her into gear she dies, i try to push the bike while in gear with the clutch engaged but it reacts as though there is no clutch...

NEED ADVICE QUICKLY. I was just getting ready to buy a 2001 FE400e when I checked with a berg expert in New Mexico. He told me to stay away from the 2001 and 2002 FE400 because the crank balancer was defective and the engines were not good past 150 hours. Most had already blown. Can anyone shed...

Starting problems 1995 FC 501, Street Legal, SEM ingnition, Dellorto VHSB 38, WAberg Seattle WA USA I am new to Husaberg and the group so I need a little help analyzing my problem and deciding on the best solution. My current state of affairs…the bike is hard to start, but runs...

Hey guys/gals. I am having some problems with my FTE radial mount master cylinder on my motard (FS650e). My problem is that there is excessive free play in the lever before the brakes start to work. My master cylinder has been like this since new, I have replaced the fluid with new Motul...

MRMAGOO accidentally posted this in the news section:

Hello, I´m sorry for my bad english, I´m from Estonia. Just bought myself 1998 fe600, but the problem is that the bike starts a little bit bad, when the engine is warm (have to kick the kicker sometimes over ten or eaven more times before the engine starts). Just adjusted the valves...

I just purchased this almost brand new 04 FE650E and can't use the E-start. The bike works perfectly but will not start even when the bike is hot and when the battery is fully charged. If I use the kick, it will start with one kick most of the time even cold so it is not a setup problem. It...

When I replaced a new oilfilter on my FE 600(-06) add had som problems removing the oil filter cover. The resault was that i had to buy a new one. Anyway, when i startet the engine the motor oil came out prom a little hole on the topp of the oil filter housing ( 1 att the picture). It looks like...

Hi, I have searched the forums a lot and haven't quite found what I am looking for, so I thought I would ask :) . I have a 1997 electric start husaberg fe600. I have just given it a complete engine rebuild and the marks I made to rebuild it as I took it apart have rubbed off so I am completely...