piston

Hello. During my engine strip, i want to change the piston. I cant figure out how to measure the piston, and what brand the piston is. taffy, do you have this piston in stock?

After seeing the significant effort of combining a '96 Husaberg crankshaft with a KTM RFS 525 rod and piston (see my thread on Husaberg/KTM hybrid engine here: http://husaberg.org/mechanical/16703-husaberg-ktm-hybrid-engine.html), I'm now thinking about what to do with the other '96 FC600...

Hello Gents, I haven't posted in awhile but its time for me to do some refreshing of my FX motor and I am thinking about increasing the displacement. I am wondering what the next logical bore size is, and what cc that would ultimately be. I guess one thought is a 570cc sized piston on my...

hey guys I am in need of a piston ring kit for a fe 570, I need a no2 or b size piston, just throwing this out thereto see if any one had a kit they didnt use, base and head gasket would be sweet too

Hi guys. I'm relatively new to husabergs. I bought mine 3 weeks ago. I've been riding it about loads. I've changed the oil every 4 hours and checked the valve clearances every second oil change. It's a 2002 husaberg fs 650 3250 km on the clock and it's had a full rebuild in the past...

can you put 650 piston in 550

please tell me! I want to replace the piston fe501 00. 94.96 to 91.94 from 93. cylinder will alter, but do not know all the sizes of the piston. height on the finger. about valves. who tried?? Prompt

Hi, I 'm just curious. Has anyone tried the 470 piston in a 550 engine, especially in an engine with a 2001-2003 cylinder head with the larger inlet valves? I've a new leftover Wössner piston, #8552DB and noticed that it's not possible to shave of the increase in the middle of the piston safely...

Hi yall, spent the better of a month now trying to locate a source to buy a flat crown piston for my 570 -09 berg, but no luck :/ Ive read a lot of threads and the CP piston is what Im looking for (standard bore) (Bike is an ice racer and Ive modded it a bit and need the static compression the...

Hey, Guys, Winter has come and it's time for me to rebuild my engine. I'm trying to figure out what size piston I would need to order. Does Anybody know the actual diameter of a 650cc -I piston ( the smaller piston) eg. 99.95mm. My liner is a little warped and I'm trying to see if a -I...

Hello, I have had my suspension done professionally in the past After taking my fork caps off my 650 to change oil I noticed that the caps were bottomed out correctly onto the spindle of the Hydraulic stop but then the stop was brought up to the cap and tightened instead of continuing to tighten...

What clearances are people running. Looking at a new piston but is only .5544mm or .02187" clearance what your thoughts too tight?

Just found out that the pistion pin height to crown is 0.4 higher on the 550 piston vs 650 piston so higher compression anyone used a 550 piston in a 650? Maybe thats why wossner list them as same part number 550/650 anyone know????

I've replaced the rings on my 2004 FE450, and after starting, the bike seems to be vibrating and feeling more lumpy than before. I split the engine from the right hand side, and didn't touch the left (clutch side) at all, leaving the covers in place. I found I could lift the crank slightly...

How do I remove the piston from the clutch master cylinder? There is a piston repair kit (50302032100) I can buy but I can't figure out out to remove the old one? There is no circlip. Help?

Hi guys.I just have bought husaberg 501 2003,but engine has been changed to 390.Piston and liner have worn out.Can I change my bike cc if I put bigger liner and piston?Maybe there will fit 2001 husaberg FX470 E FC470 piston and liner?Sorry for my silly question,but I am new in Husaberg world :)

Can anyone confirm at what hours my 2011 fx450 should have a piston change . I only use it for green lane and odd enduro . Oil change all the time . I got told that the piston would not need changing for around 300 hours that seems a lot . I had a ktm250 and I changed that at 50 hours as it...

whats the standard OEM piston size for a 04 650? the wossners are 99.95mm, cant find a size in the workshop manual for the OEM one. thanks

After having the y fitting in radiator hoses fail on my 2010 FX450 at race a couple of weeks back and seriously overheating the motor. I had some concerns about the piston, then during an enduro last weekend it started blowing coolant out the overflow. So I decided to tear it down and replace...

How far from the top of the barrel do your piston's stop at TDC ? mine is about 1.8 mm from the top. is that common? Regards