front

Hi guys Im in the middle of rebuilding the forks on my 03 fe 400, I got the forks apart and the new seals etc in place, I can't work out how to remove the spring / dampening rod. I removed a nut and a load of shims/ washers from the bottom of the dampening rod, and now there is a nut that I...

hello ! is about to buy a FS (2006) front fork to my 650 2002 (fe) . does it fits ? great upgrade ? regards daniel

I have a fx450 2011 and want to put supermoto wheels on it . I have wheels but I'm having trouble with a bracket for a 320 disc. I have tried a talon bracket tb02 but it won't fit and they are not available any more. I have also tried a braking bracket pow94 still won't fit the caliper ,it was...

Hi all! Bought a FE570 2011 with only 6 h on the clock a few weeks ago. Due to children coming along I haven´t tested it until yesterday. To my surprise the front brake lever had very little resistance and I easyliy pulled in all the way to the handlebar. I tried bleeding (no air found)...

Hello all - recently picked up an '11 FS570 and was doing a bit of lurking while researching the new ride. I gotta say that I'm really liking the way that husaberg/ktm have put this thing together, then again I'm not really all that surprised after having a 300exc and a superduke - I just love...

Hello Everyone, Just wanted to let you know about troubles I am having installing a safari front tank on my 2011 FE 570. Drilling the hole in fuel pump case: 1. The temple appears to be wrong. If you drill the hole where the template specifies, the tap ends up blocking the bottom right fuel...

During a sharp turn, in high grass, I drove with my front disk over a big rock. I didn't see it, nor felt it. Just heard it. Now the disk is bent to the extent that I lose brake pressure always at the same point of the disk. 1) Why does this happen and 2) Can I repair this and how? Thanks

Well, I just broke another front brake lever. Oddly enough, the tangs that push the pushrod in broke (as they did last time), and despite 10 minutes digging in the dirt I couldn't find the pushrod.... again! And just to rub the salt in, the world decided I should brake my arm in this latest...

Hey guys, I can't find the black piece that supports the front fender on my 08 fe450. Does anyone have any tips to a good site? My fender is just flopping around with out it. Thanks!

Hi All, On my 2010 FE390, how do I mount a number plate instead of the headlight? I bought a number plate, but it's not even close to mounting. It seems like the computer gets in the way. You also have to remove the black fender brace too, right?

hi does anyone know how much the oil gap is in 09 570 front forks,and what size fork seal driver you need for the forks..

hey I have a cracked wheel on my 1998 fe 600, i found a 1999 fe 600 wheel on ebay are they the same?

Good day all... I replaced the front tire on my 2010 FE450 today and when I put everything back together and test drove it --- NO FRONT BRAKE. Lever had no pressure and pressed all the way to the grip. I pumped many, many, many times and no improvement. This is probably the third time I've...

I'm sitting here typing with one hand, after having the worst crash ever, feeling very very sore i cant lift my left arm, but nothing feels broken apart from my pride .....perhaps lol and some bruising to my face, my 09 fe 450 felt awesome,everywhere except for when i was in ruts, the front was...

has anyone the code for the front wheel bearings on fx450 2011 . thanks

Hy Guys, I want to soften my high speed compression dampening and I believe the way to do this is to remove shims from the compression valve assembly, can I remove the compression valve from the bottom of the fork or do I need to dissassemble the forks or...... ?? Dale I would get you to do...

Will KTM disc guards work on my fe570?

Bike is 96FE600E that had been sitting for a few years. Front brake locking while on the trail and I waited untill pressure realeased - couldn't even move lever. Got it home and cleaned master cylinder, line and caliper. Fulid was pretty bad so I flushed with brake clean and used DOT 5 to...

Hello,recently I bought some triple clamps with less offset,around 11mm.It was a sweet otion to buy them,because I was searching long time to found them.The pre-owner said that the yokes fits perfectly but when I tried to instal them,I found that fits to frame but they are 12mm wider from...

Something is up with my front wheel. Since cleaning up the inside of my motor (dvsk, bigger valves, match porting, a slight bump in compression, and sorting out the jetting with a Barret muffler) now if I use a bit of throttle in the lower 4 gears the front wheel wont stay on the ground! (to...