front

Are there any servicable parts in a front brake master cylinder? No matter what I do I can't get good lever feel with bleeding it so I think something is wrong! The caliper slides freely and the pistons go in and out well so I don't hink it's this! Any other possibilities? When it's all together...

Hi all I have an '11 450 and i just saw the lovely blue levers in the power parts. I also saw the front brake flex lever, which i am also a fan of with my great crashing history.. :angry: Now they don't make a blue flex lever for the front brake. But i was wondering if o get the front brake...

I would need a front hub for 20mm axle, so my second set of supermoto wheels would be complete. My bike is -02 so all the hubs from -00-02 bikes should fit but what about the older hubs? And what KTM hubs will fit? Propably exc 400 and 520 -00-02 but what about older models?

After the bike sat for most of the winter, my front brake now doesn't do much. The lever doesn't feel that squishy, but I need to really pull it hard, nearly all the way in, to get any real braking action. Even pulling it really hard doesn't lock up the wheel. The pads are fine, and the fluid...

Good evening one and all, is the front disc of a 2004 FE450e the same as a 2004 FE650e or are they different. Cheers :?:

those that know me and will know I ride my bike without event he rad shrouds so i guess I was a bit spoilt with the old 400 but I'm starting to get used to the 570 now and for racing I find the tank quite wide and yet again it is hard to sit forward on the bike? the standard seat is fine except...

Who sells these pls ?

Anyone know the best place to get the above in the uk pls ?

Anyone know which way the bolt undose always had a circlip on other bikes.

How do you determine what you need? How do you adjust it? Do you just turn the "net" under the rebound adjustment at the top of the fork? I'm assuming counter-clockwise is 0 pre-load, and as you turn it clock-wise it adds more, correct? Can you make this adjustment with the forks on the bike?

hi, got a front sprocket from a ktm 250 exc 2006 to fit my burg, as i thought they was the same, but the bugger was different..... the output shaft must be diferent.... does any one no wot ktm sprockets fit a 03 berg cheers

I have Brought some new forks for my bike and have now realised that the forks are the later type with the bigger spindle and my supermoto (ktm/behr) wheel is earlier with the smaller spindle. Is it posible to retrofit the wheel into later forks and what is involved? thank you.

I just received my new Aqualine Safari tank (thanks Rick!) and am in the process of fitting it to my '10 FE450. Things are going o.k. so far, but I will need to "T" into the 70 Degree subframe tank somehow. I was wondering if anyone else had done this yet. It looks like it will be a tight fit...

will a 16 tooth front sprocket fit on a 2008 550? the reason i ask is because i'm doing a lot of highway driving and i just changed my rear sprocket from a 40 tooth to an original force parts Husaberg 48 tooth rear sprocket and i lost 15km top end where, before, i cruised back and forth to work...

Could someone messure the front wheel speedo replacement spacer for a FE 2002 so I can make my own in the workshop ? Im kind in a hurry since I would need it tomorrow. Also I can´t find the dust seal sizes anywhere both for front and rear. I would appreciate your help alot. Thanks.

I could buy a used Beringer 6-pot front brake with 310mm disc and some Brembo master cylinder for a reasonable price, but will it be that much better than the original enduro brake with 320mm disc and an adapter? The adapter and disc would be much cheaper, but the beringer costs about a third of...

hey guys. i got a few questions: 1. i lifted forks on my FX 450 a 3/4'' - do you guys think by doing that i changed bike geometry ? 2. with rised forks do i need to play with rear ?,i was planning soften spring to lower bike a little bit. 3. if ill loosen up spring, can i still adjust clicks on...

Hi, I had the front wheel off my 08 FE550 this week and did not pay enough attention to what the spacing of everything had looked like while disassembling Everything went back together fine with the brake disk lined up etc. However, there is some of the axle exposed on the riders right side...

anybody know how to free my caliper one of the pins has stuck on me and it wont budge even with a bar , is this a common thing ?

HI ALL LOOKING FOR SOME INFO,I HAVE A 05 FS 650 BEEN LOOKING AT DOING AWAY WITH THE PLASTIC FRAME GUARD ON THE FRONT SPROCKET AND GETTING A ALU ONE,IS THERE ANYONE DOING AT CASE SAVER OR A HYD CLUTCH SAVER IN THE EVENT OF THE CHAIN GOING ,CHEERS MIKE