front

fixed delete

Hi! Just noticed today I'll need to change my front brake pads soon. Took a look at the manual and found that it has these at the moment: 50313030100 - BRAKEP. SET FR. TOSHIBA TT2701 HHB But it also has 3 other pads listed there: 50313030000 - BRAKE PAD SET FR. TOSHIBA H38...

Hi guys! I am looking for a second hand front safari tank for the 2009-2012 Husaberg for my rally bike project. I live in Switzerland and I can pay with paypal or bank transfert. Thanks

Hi, on flat turns the front runs very wide . Do i dropped it down a bit in the triple clamps ?

Does anyone have a front caliper mount to fit a '08 FE450 with 320mm disc that they want to part with?

Hello everyone! I own a FS 550e from 2007 with both original sprockets — 16T and the front and 38T at the rear. I'm struggling to find some new sprockets (the rear one preferably in black or gold) for this same measures. Also, I've heard some people saying that the sprockets from the...

I am in the middle of modifing my 04 650 fs berg after a little crash. I have got few possibilities to choose from and don't really know which one should I choose. Parts that I have got: -standard 2004 brembo m/c, magura radial m/c and braking.nl mc7402 radial m/c; -310mm beringer floating...

One of my brackets has snapped, so I'd like to replace them on my 2005. Could anyone confirm if these will fit? Engine Mount for Husaberg 2001 - 2003 | eBay I never knew that there was a difference between 2003 and Austria made ones. Were there??

Hi Gents, Just wondered if anyone had an FE400 and decided on changing the gearing? I'm currently running the standard 13T front and 48T back sprocket but was thinking of going down one on the front and potentially going up on the back! Any tips? Or experience with what works well...

hello. i was planning to get my older rim (BEHR) onto a 2001 upside down fork on my 650. As i can see the inner diameter of the bearing in the front wheel is 17mm, and the axel in the fork is 20mm. is it possible to change the bearing to a 20mm inner diameter? maybe theres a kit for...

Came with my 04 Husaberg FC450S. I am only interested in running stock suspension so I'd like to sell these springs. They are brand new and have never been taken out of the bag. Check out racetech's website to see if they will fit your bike and if they are the spring rate you want. They are...

So I replaced the front banjo bolt on the master cylinder with a Sicass Racing front brake switch. It came with a new copper washer. I purchased a second new from my dealer. This way both sides of the brake line have new washers. I then tried conventional bleeding with a motion pro brake...

How do i get the front fender brace bolt off that bolts it to the front fender? it just wants to spin when i try to unbolt it..

I have purchased a set of Factory connection springs for my 08 550FE and the springs are different length. stock ones came out at 484mm and the new set is one at 484mm and one at 476-477 mm. Should I be concerned or is that in tolerance? it seems a little excessive and is there a way to work...

I just received my new Safari tank and am in the process of fitting it to my '11 FE570. The Bike already has sub-frame tank installed. I will need to "T" into the 70 Degree subframe tank somehow. I was wondering if anyone else had done this yet. It looks like it will be a tight fit, and I'm not...

Hey, I'm about to replace seals and oil in my 2011 FE390 front forks for the first time, and I have some questions to the forum- 1. Recommended guide or video? 2. What fork cap tool do I need? A standart KTM will do? 3. Recommended seals? thanks!

Does anyone know the part number for front brake pads for a 08 fs650e? Are there any options for different pad compounds? Thanks

Hello! My bike is afaik "a real supermoto", not a converted one. It's an 2004 FS650E. My local Husaberg dealer wants to sell me partnr 80009060000 for somewhere near $575. Are there cheaper versions of this rotor? Are there any downsides to using cheaper rotors? I've looked on ebay, but I'm...

What are the 2 wires for that go into the front brake assembly? Is that for the brake light? The light does not come on using the front brake.

Hi, I'm looking to buy an oversize disc for a 2009 FE450. I'd like to get the Tusk disc from RMATV as i've used them before but i'm not sure which part would fit as they do not list the part for the Berg but do list it for every 2009 KTM 450 and i was wondering if anyone could tell me...