front

In the process of buying a 2005 Fe650e, it was advertised as a 2004 Fe650e and then the owner stated it was a FS not Fe. Vin search shows it is a 2005 Fe650e. I plan to ride it off road, but it has been set up with supermoto wheels and aftermarked rear shock. The owner measured the front...

WP Suspension Front Fork Springs Suspension Info This suspension information is for the 2005 Husaberg FC550, and is good for all Husaberg motorcycles.

WP Suspension MXMA Front Forks Owner's Manual 4357 MXMA 4860 MXMA Husaberg Today's upside downers!

WP Suspension Extreme MX Front Forks Workshop Manual Husaberg More right way ups!

WP Suspension 4357 MX Multi Adjustor 2000 Front Forks Workshop Manual For 2000+ Husaberg motorcycles Your 43mm front forks right way ups!

WP Suspension 5060 Extreme Front Forks Workshop Manual For 1997-1999 Husaberg motorcycles

2011 FE 570 with only 1,500 miles on it. The front brake lever pulls all the way in and has 0 stopping power. The reservoir is full of brake fluid. What are the possible reasons for brake not working? Thank You! :)

Hi All Has anyone seen or heard of and Duke 2 front end in yokes on a 2004 Fe450 The rear wheel fits like a glove. i have mock built the front end up to check stance etc but i have not change the yokes yet IMO i think it give the bike a great stance. the bike is being built for a toy...

my teenage hero was 'Croz'! Graeme Crosby of New Zealand on the ....here we go...sit up and beg Moriwaki Kawazaki. https://goo.gl/images/rQFnJn what an amazing season for an eighteen year old lad, to go around the UK to each round and see him shove it up Honda and all the chin-on-the-tank...

Looking for a used front tank for my '11 FE390. Let me know if anyone is parting with one. Cheers

Hallo My bike is Husaberg FE650-02 and I wonder if anyone know the size for front Wheel bearing seals ? I still have the analogue speedo drive so it is two different seals for left and right side. (Axle size is 20 mm in diameter). Original part number 350009/350011. Thanks Robert

Hi Bergs, can anyone help me ? I am trying to find which type of bearing and gasket is used in the front wheel in my Berg FE 400 2003. Unfortunately, there are no spare parts in Czech e-shops for 2003. Also Berg representative sells parts only up to 2004. I hope that bearing and gasket is...

After a minor incident with a tree, I need to replace a few bits of plastic. Looking for somewhere to buy from. Prefer Australian supplier buy will look international if have to Any suggestions? Thanks in advance RustyAs Sent from my 0PJA10 using Tapatalk

Hi All, I am soon selling my 2011 FE 570 and over the years I have collected a number of spares for it. I have a new never used Front Safari tank for sale. I bought it as a spare in case I have any issue with the one that is installed on the bike. I dont have any of the hardware to mount...

Wanted for spindle for 2004 650 supermoto must be willing to post and be from The uk, thanks

After a complete rebuild of my 92 FE 501 we cannot find the bolts that attach the front brake caliper assembly. The aluminum mount and wheel/disk is all OK. Is this the same front brake assembly used on a KTM? Husky? or? If no bolts, our alternative is to replace the entire WP #4054...

Hey all, My 07' is not exactly stock;). Is there anyway I can tell the front master cylinder diameter from the outside, without measuring the bore? Thanks!

Hi guys looking for a 270mm oversized front disc and the adapter for a 2010 570fe Used condition is fine Will need to be posted to Sydney Australia if anyone can help out please

Hello all. I am in the middle of a supermoto conversion of my FE570S. I have a set of 17" wheels and tires sorted, and I was wondering what braking system to go with? Thanks!

hi my 650 supermoto 2004 model has a front axle with a castle nut on it can anyone tell me where i can either get a genuine type nut for this or an axle that takes the nut that threads into axle many thanks