change

Hey I have a hard clutch comparing to my friends Husaberg 650 Is it because of the hydraulic oil? I have never changed it..

Hello, I was wondering if you guys had a routine when you change out tubes; when putting on new tires, after x amount of miles, after a season, etc, etc. My search for inner tube changes didn't give me anything besides what people mentioned in tubliss threads. I'm about to put on a new set...

I looked in the owner's manual and could find no mention of octane or what fuel to use. So - what is the official recommendation? A related question - if you have to run lower octane than recommended, will any of the mapping positions be better than others. I ask this in case I am ever in the...

do u change every time u change the oil,or every other time ect

Hello! I have a Fe550 2004 with 160 hr´s on it. The last owner stripped the engine at 100 hr's after a crack in the engine case. They "measured" everything in the engine he said, and changed the camchain. I checked the camchain tensioner today, and it was fully extended. I have read...

I´ve heard that some riders changes the angle of the shock absorber, in order to get a more progressive damper. The new husa and KTM seems to allready have that. But how do I change the angle? How much do I need to cut and weld to make that happen? Regards Conny

Hi to everyone a little advise is wot i am after , i have a fs650 2002 with the sem stator i purchased the bike last week ,as it had been standing i didnt pay a lot of money for it (actually it was a giveaway). i stripped the bike down for the usual checks and when i removed the stator cover...

I have a bit of a problem. I recently started enduro's in September and after I got the first one under my belt I decided it was time to get some new boots because my trusty old tech 4's were looking pretty sorry for themselves with holes left, right and center from constant supermoto use. I...

Bought a second hand 450 sm just attempted first oil change. Loosend of plug 1 which felt 'locked' up to start and then it just starts spining and trickling a tiny bit of oil. Cant get the thing off or tighten it up, have a bad feeing about this one as the oil screen bolt is also locked...

having recently had cause to be offered a 2002 left and a 2003 right case i was unable to fit the clutch gear on whatsoever. careful measuring shows up that the crank's boreline was moved forwards around .004" (0.1mm) from '02 to the '03 model. several people have said that the gears...

Read some stuff on KTMTalk about heavy guys and the rate of the springs they use, which made me thinking about changing my reaar spring. I'm about 240lbs and on my 2004 FE 550 is the default 71-90/260 spring. If i look at the owners manual, there is an other option for a stiffer 81-99/260...

I have a 2000 fc501 which is road registered i love the thing to bits it puts a big grin on my face every time i get on it.I think ive got it as good as iam gonna get might go for a 15 tooth front sprocket cos it has the 6 speed box and you can be quite busy changing up and down.The million...

Hello bergers around the world , I wonder if aftermarket accelarator pump cover for FCR can improve performance of engine and works nice generally.I tried to fit one of them but when I install it in my 07 FS650e doesnt work.The engine increases RPM difficult and doesnt work properly.I...

Weather was miserable today so I treated the "berg to an oil change. First I've done as I've just taken ownership of it. I've got 2 questions. First one is how to stop fuel leaking out when bike is on its side. I turned the fuel taps off but had to resort to just leaning the bike at a 45 degree...

alright guys the head gasket is away on my 650 is changing the gasket a job i could do or will it have to b left in does the engine have to come out ?????

Hi, I just wanted to ask how much the disconnetion of the engine breather influences the jetting? I noticed a noticeable changing in idle speed - can be set easy to "correct" again. How big is the affect on the other carb-circuts? Anydody ever checked this(Taffy)? Regards

i have broken the crankshaft and the main gear which is crackle. my mechanic suggested me to change the (really don't know the english name) clutch gear...i'll show you a photo: it's the big one with six rounded hole... :roll: :twisted: :roll: it doesn't show any kind of...

Hi all, Finally got the speedo working had to fit a new sensor, one thing suddenly occured I am now running 17 inch wheels so now when I am doing say 30 mph the speedo is showing 45 mph does anyone know how to change the ws size number 2205 down to 1840, there is nothing in the instructions...

Why do you change spokes? The question are to all of you, but to Taffy especially... :) Do they break? Do they weaken? (I think that´s the word for "not beeing as stiff as earlier" correct me if I´m wrong.) When you´ve got the spokes to the right tension, do they have same tone...

Hi, I've just swapped from an 04 fe380 to a new 07 fe 450. I'm going to fit a Vapor unit, partly for temp checking and partly for showing revs. There is a facility to set "shift lights" at the revs you determine. Question is, at what revs is a 450 at the top end of its power or...