change

Can anyone confirm at what hours my 2011 fx450 should have a piston change . I only use it for green lane and odd enduro . Oil change all the time . I got told that the piston would not need changing for around 300 hours that seems a lot . I had a ktm250 and I changed that at 50 hours as it...

Hello All. Im a newbee, this is my first post – unfortunately its not a good one, and fairly long. I have an FE550, 27 hours, 800miles, ive had the bike 3 months and believe before I owned it is was regularly service and well looked after. It came with spare oil, oil filter etc. I am a...

Just about to change my chain, which is at max adjustment. It has been suggested that I should also change the sprockets even though they look ok. Do you normally change sprockets as a matter of course when getting a new chain? Thanks

It's like a Swiss watch, the Husaberg - lots of funny little parts. Here are some oil change tips: - Change the oil after a short ride to make sure that all particulate matter is in suspension in the oil and will drain out with the oil. - You need to dismount the skid plate to do an oil...

I have my buddies 94 600 Fe? i think, and it needs an oil change, what oil wieght is best? does it use the same oil for the tranny? If not what oil is good for the trannsmission? Where is the drain plug? And also where is the drain plug for the radiator fluid? Thanks

I have got a 501fc 99 just wondering what oil i should put in it and how often i should change the oil and filters can anyone help.

Hi. Someone who can help me with this question, how do I change the oil in my steering damper in the right way and how much oil it should be in? I have tried, but probably got in too little oil, then it does not feel like it's working now. Someone who wants to write a concise and simple...

Thought id share the pics of my first oil change, 300 Kms. The first is from the bottom screen...Top screen was clean. This is what was left from the sump.

This comes from post I made a couple of weeks ago named: "New Berg (2011) engine or inyection problem" at "Unofficial Husaberg". Dale, Davo and everyone else who has tried to help me in this matter: Burn-in is still happening in my bike, not because of excess of oil (have checked that) or any...

Can someone please settle a difference of opinions re time to do the first oil change for 2011 model FE 450. Just wondering how many km's/hours people are clocking up before the first oil dump. Secondly, some are quoting 10 hour intervals after the first oil change and also changing the filter...

Whats the best procedure for break in 4 2010 FE 570 ? Oil change @ 1hour ? What oil ? My dealer doesnt carry the Motorex.

Is it possible to change the fork springs on the new CC WP forks without having a special vacuum setup and special tools. If it is possible does anyone have a step by step process for doing so? Sorry if I've duplicated a any previous post. Thx!!!

Hi I'm restoring my 98 Fe600E, and would like to change the timing sprocket (alum.) to a steel one. And I want to have a 04+ autodecomp. Are the steel ones of the same dimension of the 98 ones ? what year ? Thanks ZAGA

I am thinking of running either amsoil 20w50 or motul 5300 semisynthetic. what's better! I will be riding on the streets 100% (20%) hard. should I change my oil every 8-10 hrs or by running amsoil are the oil change intervals pushed back. I know on a car with amsoil you can go more than...

HELLO, I just bought a used 1997 FE400 and it's time to do some tuning. I have an owners manual but it doesn't give much detail on maintenance and repairs. For instance I'm not sure how to disconnect the clutch cable to get at the oil filter. I'm not sure how to check the oil level either...

do somobody have a link in about chacging oil on my husaberg? (i did look at youtube but i did not find somthing) or other site that i can take a first look ? thanks

I'm about to tear my FE 450 -08 apart and replace some bearings. There's nothin wrong with the bike but the hours is running away. Now to my question: I'm planing to replace crankchaft bearing, balancer shaft bearing, timing valve bearing, timing chain, tensioner and the rings and gaskets. Is...

Hi All , This is my first post so hopefully I'll get it right . :) I have changed my oil on my 2009 FE450 tonight and after changing and measuring the oil when I started it up it ran for a while in netural then died :( I clicked it into first and with the cluch in I am getting no movement...

Just dropped the break in oil at 1 hr, cleaned the screens and put in a fresh filter and filled it up with Rotella T 15-40, this is a non synthetic and no moly oil, the guys at GDR use it in thier bikes too. I will repeat the process at 3 more hrs then my routine will be oil every 5 hrs and...

just after some info on how much oil is everyone putting in after a full filter and oil change i know the manual states 1350ml but will this make oil level to high as surely you dont get every last drop out cheers aquajett