change

I have a 2011 FE570S. The headlight and taillight stopped working so I replaced the #3 fuse which was burned out. When I went to turn on the ignition switch the running light flashed and the whole bike lost power. When I turn the ignition switch I get absolutely no power. The bike does nothing...

Could anybody tell me how much and what weight oil for a 02 650. Could you guys also confirm the seal size, I ordered a set pulled the forks apart and bingo too big....

One of my seals is leaking, so it's time to give the forks a service. Does anybody have a suggestion for what to use as a diy seals driver?

Have fe570 does any other shock from a ktm or any other bike fit,my shock is set up for supermoto and want to do some enduro in off season but to much hassle and cost to get it redone for enduro ,was hoping to buy, another shock and just switch

Hi I have a husaberg supermoto and i want to replace the wheel bearings in the front wheel and rear. i heard a noise and i think that is the problem. I dont know which brand to choose. i found these (moose-all balls-pivot works) does anyone know what brand is the best? i think all balls using...

I love this bike to bits, but theres a particular bit which always fills me with dread - oil change time!! :eek: Theres always spiky metallic bits on the mag plug, which do worry me a bit but i know these are normal. Today though, when i inspected the plug - there was a piece of metal...

Hi all, Finally changed the oil in my 570. Got it with ~37 hours on the clock, last change at ~25 IIRC, now at 40-42 (can't remember). Found some swarf in the lower screen and on the magnet. Most of the fragments looked similar, varying in length mostly. Seemed to come from something circular...

Hello. My name is billy and would like your help. I'm new to the forum. I would like your help. I have a husaberg 450 fe 2004 model with 237 hours. I opened the engine to change crankshaft bearings. The piston but has some gaps in the sleeve. So I want to change it. What piston do you suggest I...

I have a new one coming for my Fe570 Is there a way of doing it without splitting the cam' chain? Has anyone done this, any special tools I need or advise worth having.

Hy, i have an FE 450 2009, with the standaard dash, but the wheelsize (ws) is 1884 , but for europe it must be 2205 with the standaard 21"tire. The speed is set on KM/u How can a change this? :? A also cant find the clock in the display. I repeatedly press the O button, but no clock. Thanks...

So no shock or forks on the 570 and I needed to do an oil change. So I strung her up lol

Hi, I need to replace the front brake switch on my berg and think that I would prefer to go down the path of the banjo bolt style switch instead of the fiddly little electrical switch under the lever (gets caked in mud and ceases all the time). Is there any reason not to make this change...

I have a Husaberg FE570 and I wants to reflash my 570 ECU with the 450 ignition setting. Anyone knows if that´s possible? My dealer says it don´t and Jocke Ljunggrens mechanic (his father) says it does. Any inputs?

I've been changing my oil like this for a while now and thought I'd share my methods for getting almost all the oil out of your bike. My bike holds 1 liter, this change is at 8 hours. I rarely go past 10 hours. The last change I put a new filter in, so will change it next time or on the 4th...

Interested in thoughts please from wiser people than me. I change my oil on the 390 every 10 hours, filters every third change. Oil comes out in pretty good condition I think. Is this too frequent? Friends think I'm mad and should change to 20 hours. Just do trail riding in 3 to 5 hour runs...

Anyone have complete step-by-step instructions on how to change the fork oil on a -09 FE450? WP 48mm open cartridge. Thanks. JT.

Hi, I was checking axial play of crank on flywheel side, by pulling it out and in. Can it be measured like what I do on picture? I measure 0,6 mm, like what I was reading in 'doc, that is ok for 2 roller bearings. Do you know what type of bearings were used in FE501 2003, in spare part is...

The manual says to lay the bike on its side when changing the filter. I've never had to do this with any bike so I'm wondering... how you keep the gas from running out the breather- plug it with something? Is there anything else I need to be concerned with when laying it over, as far as spills...

Hi there. Im currently riding a supersport bike and im finding that 180 mph straight line speed is not my bag. All my teens and into my 30's i had MX bikes. Im looking to get back into the upright off road bike in the guise of a SM with the option of having a set of off road wheels for the green...

Hey, im considering buying a 03 650fe Berg. on this bike the stator is broken and need change. Ive heard with my local dealer here in Norway, they talked about when the stator is changed the flywheel needed change as well? is this true or is this just recommended? and where to find these...