cam

as some of you know, i do an exchange camshaft. the knackered ones i get in usually have the cam code still emblazoned on the end. i have had a couple that don't and they are different. they are identical except for one thing; the whole cam sprocket mount is 3mm inbound towards the cam...

what is the fix for this issue?2010 part or aftermarket item like Dirt Tricks tensioner?

I just bought a Late 2003 FE400 that had had its starter motor removed. I have since replaced it back, however in doing so had to take out the clutch to replace the gears behind.... This is where my problem lies, me being me took out the clutch without much thought and didnt mark where the cam...

is it automatic or does it need to be manually adjusted, just seems a bit noisy in there thats all!

Hi there, doing my valves for the first time, and I'm wondering if the cam has to come out in order to re shim? In the repair manual it say's it does, though I read a reply Dale E wrote saying rockers came out, thiough no mention of cam. Whats the best way? Also does anyone know the...

The decomp return spring on my 1997 600 is now F.U.B.A.R.ed as I have tried to bend it to make it work. The pranged part would not grip the flat part of the decomp very well and slips barely staying in place neting little to no spring tension. If I order another stock decomp spring which was...

Last night I posted about cam chain issues. I was sure that my cam chain had broken. But tonight I took the rockerarm cover off the bike. And here is what I saw. http://tim-schaefer.smugmug.com/photos/ ... F5Fn-M.jpg http://tim-schaefer.smugmug.com/photos/ ... PZXi-M.jpg...

With less than 20 hrs on my last cam chain replacement. I broke another one this past weekend. I am thinking that it was my "at home" chain rivet job quality. Now I need to check the valves to see if they are bent. I am thinking of just rotating the cam and checking the valve clearance. I...

Hi, just sharing a couple of my most recent videos with anyone interested. some of this could be fit into a tidy near 100km loop for a force ride, this hills wont bother any of you, the rocks might. Azza. http://www.youtube.com/watch?v=edD2InFOGFo a snippet of the 'blackhart trail...

I wrecked a 01 KTM 400exc and a 04 450sx recently and last week tried the cam in a 03 650 head that that I had sitting around. It looked like the cam would slot straight in if the waterpump drive was lopped off. Any thoughts ? Regards Dan

Hi, Anyone knows the part# of cam follower pins or complete follower assembly (If I recall pins with diameter of 7.6mm not 8mm).KTM part# is also ok.

has anyone ever tried to fit a newer steel type of upper cam sprocket to a camshaft in a 1996 FC bike.they both are 30 tooth.is this project possible?dan

Hi Guys, just a quick question,are you able to purchase cam folower bearing kits for the 04 bergs or do you need to replace the whole rocker arm as one complete unit.I have used a bearing kit only on earlier model. See YA!

Hi all, thinking of getting a GoPro helmet cam for a bit of on board filming, anyone used one? Any feedback on them would be appreciated. cheers Carl

Im replacing the cam bearings 6201/c3. Now do I get rubber sealed bearings or open ones? Also I have replaced the Cam follower bearings, is one centre punch enough to hold them in or should I do both shoulders? ie each end of the pin?

Just replace a cam chain looked like the cam was 180deg out lined up dots on crank sprockets and the cam was dot how its pictured in manual. I set it up as pictured in manual and set the two dot level with head face.in any ideas why this might be the case?

Hi folks, KTM 400 and, maybe several other models if I recall, are running '01' profile camshaft. Nonetheless, they are also running dual springs with '01' profile.Then if we assume '01' Husaberg camshafts and '01' KTM's share the same profile, it should be possible to use dual springs used...

Anyone aware of a Fast Cam being made available for the new Berg 570????

Wille - write your question here.

does the KTM cam fit straight in one of the older bikes? anyone know? regards Taffy