How many hours has your Berg done?

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
-12 FE570. Doing 90 hours service on it now. One exhaust shim is 0.20, else its just fine. Will change piston @135 just to be sure.
 
cheeseberger said:
My 2004 FE550 went 500hrs with only a cam chain replaced and a few seals before a valve spring went. My 2007 FE650 has 267hrs and its never been touched. I think the key to these bikes lasting is keeping the front wheel off the ground.

cheeseberger
I think the key to these bikes lasting is keeping the front wheel off the ground.
I like that!!!
 
My 06 FE450 Top end @ 58 hrs just after I bought it,and a complete at or around 85 hrs since then 124.4 hrs and a total of 4177 km on the bike, still as strong as it was when it was fresh.

My 12 TE250 has 31.5 hrs and 770 km just oil changes,with the EXP the oil after 2 hrs is still like new.

fedge
 
160hours on my husaberg fs570
Used +-70% comute to work 25% fun on twisty roads 5% trackdays I only had bigger metal parts on the magnet once but that's about 30hours ago and after that I checked the magnet a few times and all is fine again engine has not been worked on yet just valve check x3
Planning to ride it to +-250 hours to next winter but from now on more intense use about 50% comute 40%fun 10%track use.
The only problem I had recently was my fuel pump/injector failed and my bike kept stalling now they are cleaned up and bike is running toublefree 8)
I only do oil/filter change every 15-20hours depends on use I use the oil they recommend in the manual.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top