2003 fe450 starter issues

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Sparky1973

Sparky1973

Joined
Dec 2, 2023
Messages
2
Location
Westhoughton bolton
Hi everyone I've got a fe450 it's developed a electric start issue, when it starts to turn over the motor then just spins the starter, when you kick start it have it run for only 2 minutes switch it off it does start on the button but not reliable could this be the one way bearing ?
 
It looks like you have a 2004 model, not an '03. Building on what Taffy said, it could be the sprag (one-way bearing). Ensure you are using the correct oil for motorcycles, as the wrong oil could cause the sprag to slip. The torque limiter could also be suspect. Search this site and read up on them. Make sure the valves are adjusted correctly, as this can influence the effect of the autodecompression (ADC) device. The ADC device could be worn. However, the first things I would check are the ADC spring, as they tend to lose tension and can become unseated, and your oil.
 

Similar threads

F
FE570 low idle issue, outside of the usual suspects! (I think)
Replies
3
Views
882
emanujo
E
o6550
06 fe550e - Starter Relay wiring
Replies
1
Views
622
o6550
o6550
T
no power to the fuel pump and lights on start FE450 2009
Replies
1
Views
594
tpayne
T
G
2003 fe501 cylinder head repair/replacement questions
Replies
8
Views
752
Taffy
Taffy
W
2010 Fx450 crank no start after engine work
Replies
3
Views
653
waylon
W

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top