This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Help Husaberg 2010 fe 390 ?

Joined Aug 2013
2 Posts | 0+
Calgary
Help Husaberg 2010 fe 390 ? Damaged Shifter SHAFT

I broke the shifter screw off then fixed it with heally coil. Since then went through three shifters oem, Warp 9 and Hamerfist.

Would like to know if anyone else has had this problem.
I Think replacing shifter shaft would be a big job.

Any other brand of shifters that might help or workarounds?
Thanks In Advance.
Jason Enduro Rider out Calgary, Canada
 
Last edited:
Not a real big job, sidecover and clutch off, replace shaft, clutch and sidecover back on. New gasket and crank seal if you please.
 
  • Like
Reactions: 2 people
Buy a new shift shaft, tried the same things you did. Finally gave up and found a good used one from a 2010 ktm 525/530 for about 30 dollars US. Replace shaft seal as Bergsl mentioned. May want to do it while changing your oil.
 

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions