This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

FE 450, 2005, Force Edition

Thanks Taffy!

Here's some pics to clarify....

1. Inner clutch hub from my engine, part nr. 59032002100R:





Engine side, you can see the holes (spring retainer bolt holes drilled through):





2. New, never used inner clutch hub, part nr. 59032002500R:



Engine side, no holes



Outside





So, you're saying that the hub with part nr. ending -500 is the newest and the best part available?



And 17L Clarke tank.....



M.
 
  • Like
Reactions: 1 person
I got an exhaust - headers and connecting pipe off a 2005+ model and it doesn't fit my 2004 FE 450. Is there a trick to make it fit....cutting/welding? I really like the look of the newer model pipe but if it's too much of a hassle I would probably be willing to sell it...

M.
 
makazica, how come they dont fit? where is the problem? does the connecting pipe touch the frame, or what? I want them headers, I have now head from 2006 model year, must fit! tell me what it exactly means that they dont fit. make sure there is "450" stamped with a die on the surface of both headers that touch the head. I have such headers with 650 on them, they dont fit at all.
 
Last edited:
Cant wait to see it covered in ****!

Cracking job fella, done loads of strip downs on road going bikes, dont think i could do it to a dirtbike knowing the abuse that will entail.
 
edelweiss said:
makazica, how come they dont fit? where is the problem? does the connecting pipe touch the frame, or what? I want them headers, I have now head from 2006 model year, must fit! tell me what it exactly means that they dont fit. make sure there is "450" stamped with a die on the surface of both headers that touch the head. I have such headers with 650 on them, they dont fit at all.
Click to expand...

I didn't know that it should have a "450" stamped, I'll check.

The mounting point on the connecting pipe doesn't align with the hole on the bracket welded to the frame and of course my 2004 muffler doesn't fit. I could cut & weld but it's too big of a hassle right now.

In the next couple of days I'll try to source a 2005+ muffler but if I don't find it it's up for sale.....edelweiss is #1 in line.


Bjorn said:
Cant wait to see it covered in ****!

Cracking job fella, done loads of strip downs on road going bikes, dont think i could do it to a dirtbike knowing the abuse that will entail.
Click to expand...

I too can't wait to ride it and believe me.....it is going to be covered in **** soon..... :D

I enjoy working on it and I enjoy breaking it.

M.
 
makazica: there is a rubber connecting link between the rear part of middle pipe and the frame fitting, I dont know, if you know this, dont know how it looks on 2004.
 
Headers dont fit, they are for a 650 model and are up for sale cheap...contact me via pm if interested.

A couple of hours and ready to race...
 

Attachments

  • IMAG0727.jpg
    IMAG0727.jpg
    89.5 KB
  • IMAG0725.jpg
    IMAG0725.jpg
    86.7 KB
  • Like
Reactions: 1 person
Three years ago a friend sold his 2007 FE550 with barely 40 hours on it. Today the bike is his again....with 80 hours on the clock....

What a monster of a bike...
 

Attachments

  • IMAG0878.jpg
    IMAG0878.jpg
    93.6 KB
  • Like
Reactions: 1 person

Similar threads

Taffy
New - improved carb needle 2004-2008
Replies
3
Views
2K
FlyingZebra
FlyingZebra
D
2010 6 Hours of Glen Helen
Replies
2
Views
1K
sethro
S
K
New Guy to the place - and a ride report on my new FE 450
Replies
9
Views
2K
Taffy
Taffy

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions