FE 450, 2005, Force Edition

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Thanks Taffy!

Here's some pics to clarify....

1. Inner clutch hub from my engine, part nr. 59032002100R:





Engine side, you can see the holes (spring retainer bolt holes drilled through):





2. New, never used inner clutch hub, part nr. 59032002500R:



Engine side, no holes



Outside





So, you're saying that the hub with part nr. ending -500 is the newest and the best part available?



And 17L Clarke tank.....



M.
 
I got an exhaust - headers and connecting pipe off a 2005+ model and it doesn't fit my 2004 FE 450. Is there a trick to make it fit....cutting/welding? I really like the look of the newer model pipe but if it's too much of a hassle I would probably be willing to sell it...

M.
 
makazica, how come they dont fit? where is the problem? does the connecting pipe touch the frame, or what? I want them headers, I have now head from 2006 model year, must fit! tell me what it exactly means that they dont fit. make sure there is "450" stamped with a die on the surface of both headers that touch the head. I have such headers with 650 on them, they dont fit at all.
 
Last edited:
Cant wait to see it covered in ****!

Cracking job fella, done loads of strip downs on road going bikes, dont think i could do it to a dirtbike knowing the abuse that will entail.
 
edelweiss said:
makazica, how come they dont fit? where is the problem? does the connecting pipe touch the frame, or what? I want them headers, I have now head from 2006 model year, must fit! tell me what it exactly means that they dont fit. make sure there is "450" stamped with a die on the surface of both headers that touch the head. I have such headers with 650 on them, they dont fit at all.
Click to expand...

I didn't know that it should have a "450" stamped, I'll check.

The mounting point on the connecting pipe doesn't align with the hole on the bracket welded to the frame and of course my 2004 muffler doesn't fit. I could cut & weld but it's too big of a hassle right now.

In the next couple of days I'll try to source a 2005+ muffler but if I don't find it it's up for sale.....edelweiss is #1 in line.


Bjorn said:
Cant wait to see it covered in ****!

Cracking job fella, done loads of strip downs on road going bikes, dont think i could do it to a dirtbike knowing the abuse that will entail.
Click to expand...

I too can't wait to ride it and believe me.....it is going to be covered in **** soon..... :D

I enjoy working on it and I enjoy breaking it.

M.
 
makazica: there is a rubber connecting link between the rear part of middle pipe and the frame fitting, I dont know, if you know this, dont know how it looks on 2004.
 
Headers dont fit, they are for a 650 model and are up for sale cheap...contact me via pm if interested.

A couple of hours and ready to race...
 

Attachments

  • IMAG0727.jpg
    IMAG0727.jpg
    89.5 KB
  • IMAG0725.jpg
    IMAG0725.jpg
    86.7 KB
Three years ago a friend sold his 2007 FE550 with barely 40 hours on it. Today the bike is his again....with 80 hours on the clock....

What a monster of a bike...
 

Attachments

  • IMAG0878.jpg
    IMAG0878.jpg
    93.6 KB

Similar threads

Taffy
New - improved carb needle 2004-2008
Replies
3
Views
2K
FlyingZebra
FlyingZebra
D
2010 6 Hours of Glen Helen
Replies
2
Views
1K
sethro
S
K
New Guy to the place - and a ride report on my new FE 450
Replies
9
Views
2K
Taffy
Taffy

Register CTA

Register on Husaberg Forum! This sidebar will go away, and you will see fewer ads.

Recent Discussions

Recent Discussions

Back
Top