water

Good evening! I've recently developed a bit of a leak from the weephole on my 99 400fe. I read up a bit on the topic and have gathered that 1 of the 2 seals around the camshaft are leaking. I went ahead and ordered both seals and some other odds and ends for the job. Reading through the factory...

I have a 2005 650 FSC. The water pump impeller has lost two blades. Do you know which impeller fits that? I’ve heard that a lot of KTM parts will fit the Hussa Berg. I’m having a hard time finding parts here in the US.

I am a newbie and have read through every thread I can find on this topic and saw a few YouTube videos. I was so excited to get this bike and before I could even ride it noticed the oil was milky. I have a few questions that have not been answered in the threads I have read and the videos I...

I have a 2002 fe 501 which is getting coolant in the oil. I have replaced water pump seal and o ring for gearbox cover. Suspect it is a head gasket failure?? Is this common??

Hi guys my bike starts leaking by the weep hole behind the water pump, it doesn't stop leaking when engine warm up a little. i read several foruns about the seal, but will be this case? i remove the water pump and didn't notice any failure on the seal (visual) only notice that the seal is in...

Hi all Got a 2002 FE650 that started getting a lot of oil coolant in the engine oil. Thinking I should replace the water shaft seal (maybe one of those fancy jobs Taffmeister has?). I was surprised when I took the clutch cover off, and there was another seal on the inside! Look at the pics to...

Hello, im interested in buying a water pump cover for my 650 if anyone knows where i could buy one? Mine is cracked and leaking. -Rune

Question for the group: my water pump seal is more than just weaping, it’s leaking about and ounce or more after each ride. Would it be proper to put in a new gasket, or add some gasket sealant to the original gasket and call it good. Thoughts? Sent from my iPhone using Tapatalk

Hello guys! I'm new to this bike and i am just wondering if it is normal that they overheat/boil when they stand still for a while, while running. About 10-15 minutes of standing still and it starts to boil (came boiling water out the hose at the top of the radiator). haven't had a problem...

Correct way to install water pump seal Hi everyone, I recently purchased a husaberg fe400e 2002 model. there's a bit of a water leak coming from the wheep hole. The guy before me had done a lot of work to the bike and had actually put a new water pump seal and in, after reading quite a...

@all: 2 covers Gen 1 silver to let because I need Gen 2 Modell 2006-2008 Shipping within Europe preferred. Asking EUR 29,00/pc Cheers

Water pump weep hole dripping coolant while bike on stand after very hot day. Bike not started. Any one else had this. Drip not from radiator over flow tube but from weep hole.

Hi, I have just become the proud owner of a 1997 FE400 which I intend to race in the evo class at vinduro events. I'm in the process of getting it set up but I've just noticed a small hole at the back of the water pump housing. It doesn't appear to be threaded so I'm not sure what it's all...

Hello, Can someone tell me if I can replace the impeller w/o removing the clutch cover ? Thanks

Hi to all, Could someone share the dimensions of the water pump bearing, I am hoping to order the bearing prior to pulling the bike apart. Thank you Ray

There are already several threads about this, kudos to the authors! Just thought Id publish the photos from this session. To change the water seal (ie if coolant is coming out the weep hole) its a fairly small job, it can be done without removing the engine cover, just the housing needs...

looking for water pump cover for 2014 FE 350...help

I know this has likely been discussed but most of what I have found in on the older motors. I am getting a decent amount of coolant in my oil. No oil in the coolant and no leaks from the weep hole. Gasket on side cover looks good. It doesnt seem to be pressuring up the cooling system...

Whilst stripping my project engine fc550 2002 I found this is at simple fix of new seal ? Sent from my iPhone using Tapatalk