valve

Hi, found this one... :( one of the exhaust valves on my fe450 2008 does anyone know why this happens? what do i need to do when i install a new valve ? [attachment=1:1g78hvwd]IMG_3508 (kopia).jpg[/attachment:1g78hvwd] [attachment=0:1g78hvwd]IMG_3507 (kopia).jpg[/attachment:1g78hvwd]

I know that is written in the DOC how to do it,but i cant understand it :oops: . For the start ,my complete clutch is taken out and so are cams and timing chain. So first put the engine on TDC ,looking at the mark on ignition timing (and checking by plug hole) Marks on gear wheels should be one...

Ok guys, I've searched TON and have actually checked my valves before successfully but am having some problems this time around. The bike is a 1997 FE400! The Problem - I cannot loosen the valves enough to fit a .10mm feeler gauge in. They valves are just too tight. The Process - I have...

Please help ! How to set the valve clearance FE 390 2011. Instructions would be greatly appreciated, because in my place there are no dealers or authorized repair shop Husaberg. Thank you. :D

Hi, does any know if this kit is good, seems like a bargain for the price (2230 SEK aprox £195), valves and dual springs. do i need to do anything with it to make it fit my 450 2008 partnr: 00060000030 /Martin

I'm looking at buying a 2000 400 FE. The price is right but it needs a new cam, valve rollers and timing chain. Are these parts hard to come by?? How much approximently would they run??

well, after 20.9 hours of use the valve clearances on my 450 are in tolerance :wink:

Hey bergers. Just picked up my 2010 FE450. It's my first true off road bike, as opposed to a converted mx bike, and my first serious four stroke. I really like the engine and suspension! On to my question. At 6 hours I checked the valve clearances. Exhaust valves were both 0.14mm, right in...

So after reading a bazillion of threads, I'm still not sure about the hole process. First - where do I stick the gague? here is what I have understood, tell me if I'm wrong. 2.I want to make sure I got this DTC right. the explanation I (think) I understood best was by Taffi on this thread...

Believe it or not, I am riding a 94 501 with license plate and it has been very kind to me. I bought the bike about 2 years ago. I took the rocker box off for the first time to check things out and found that my exhaust valve rocker arm has a notch in it large enough to cause concern. I am...

Hi all, I broke a valve spring (dual) a month ago and ordered the Taffy spring kit. I had been out of town and was expecting to have the bike ready upon return only to find the work has been on hold for fear that the Taffy springs are not correct for the 05 FS 650E. I don't have the...

There are a few working systems, they all seem to depend on a rocking flipper cam whose active portion is pulled more or less in or out of action, depending on desired valve lift and timing. Some uses a conventional cam to power the reciprocation, some uses the harmonic movement of an excenter...

When 1st trying to diagnose this I had posted in FUEL Postby DAY51 » June 13th, 2010, 6:52 pm Thanks for taking me in the right direction birdwoodburg. Just opened the valve covers to find a broken left outer exhaust spring. Can the spring be replaced by putting the cylinder under air...

HI Guys, last night i removed the old conical valve springs from my 07 FE650e head. I fitted out the outer spring of the DVSK as it says in the instructions and checked the rocker cover for a fit and it slipped right on. i thought this was strange as the instructions say i will need to hone out...

had my 1st valve clearence check on my fe 450 /09 at 77 hours absolutely spot on i think i've done 12 oil changes in that time and i ran the bike in for the full 12 hours so i'm well pleased :D :D now i need to set my sights on an 2011 model :D :D :D all hail the bergs there awesome

Hello, I would like to make duel valve spring my FE600 2000'.How to modify the cylinder head? where can I order the duel springs? Thanks Thomas

ok guys, I need some of your opinions here. Got my 08 FE550 brandnew, and from the very first start-up, the engine was burning a bit of oil. So far no problem, as it takes some time for the liner/piston to be matching. @ about 30 hours, it became better (no smoke when coldstarting or going...

I'm trying to make my FE450 forks feel like my 2009 KTM400xcw forks. I've allready put in a .46 spring and was interested in comparing the valving. I know I could just bust them down and measure everything but I'd rather not if it's not gonna make much difference. I especially do not want to...

Hi Guys, I'm going to set the valves on my new-to-me 2008 FE 450. I've done BMW adjustor type valves but never a dirt bike with a decompression lever. Do I disconnect the spring or lever prior to checking and adjusting exhaust valves? Then when valves set ok reconnect and adjust cable free...

I have a chance of buying KTM EXC 01-07 valve springs for 6 times lower price than normal and i was wondering if they fit on Husaberg since i heard that Husaberg tends to suffer from broken springs. Do they fit?