valve

Anybody knows the size of the valve adjustment locknuts on the 2001? Danke schoen.

What should the Valve clearances be adjusted to on my 03 FE501? the owners manual says 0.10mm,this ok? i am hoping the adjustment will make it start on the button!

I ordered a new intake valve to replace the slightly bent one for my 2002 FE400. The part number I tried to order was 200 224 01 which I got out of the parts manual. I was sent an updated part number 590 36 030 000. Both are 35mm valves and are identical except for the stem length. The newer...

Well after a couple of parts sagas, and waiting for spring to arrive, I am almost ready for the inaugural putt-putt on my first berg. Have been assembling tools required for servicing and I recall someone here recommending a beam style torque wrench for doing the valves but I can't recall if...

Does anyone have a good source for a valve adjustment tool for an 05 650? The tool I've seen looks to be like a 10mm socket with a handle attached but open at the top to allow for easy adjustments and has MP 08-0073 on it. It's shown here but I'd hate to buy all 3 pieces when I need only 1 one...

First off bike specs: '04 FS650e USA edition Okay well I have been searching but before I started digging in where everyone else was suggested there was one thing the others didn't have that I had, the bike was running fine then died. I JUST bought the bike, test rides were all fine, bike...

Gents, for those who do their own head work, what Valve Spring Compressor do you use? I have equipment for automobile engine use but it won't fit the Husaberg head. Thanks, Joe

Hi! I have an old (veteran?) 350 Husa from -92 that has been converted to a 400. The 89-95 Husa's has a valve adjustment screw that is solid, without any "elephant foot" as the -96 and newer bikes have. When checking with the Husa-parts shops around the original 89-95 screws (part no 200...

Does anyone know if any model of KTM valve seals will fit to my FE 600 (98)?? Please help!! Thanks

Just picked up my new valve guides, tried to get the valve in , but it doesn't fit? Could it be that the valve guides need to be pressed in the head first and then honed to the right size or did I just get the wrong guides? Part numbers match with the husa parts list. Anyone happen to know...

I am in abit of a pickle i need some for my bike (2005 650FE) and i didnt order them from my berg man and i need them today. Can i go to the KTM dealer (are they same as 525 etc) and get them from him. If so what part number would i need to quote? Thanks guys...

hi everyone my name is paul and i'm new on here, just registered, but been using this brilliant site for a week or two for some very useful information. iv'e just bought my second berg a 2002 fs650, i had a 2003 fs650 about 2 years ago and never had a problem with it then sold it and...

Well after 7000 miles and 280 engine hours of good yeehaw fun it finally happened. I have a broken exhaust valve spring. Wasn't riding it hard, just fun as usual and then the motor quietly went dead. No nasty noises or grinding sounds. Opened up the motor and found it was a broken exhaust...

Hello! I am new on this forum, and a newbie with Husaberg. I have bought a 2005 Husaberg FS650E (brandnew, 0 miles/km) I have been riding for more then 500 km now, so i want to check he valve clearance. How do i it? How can i find the TDC?(top dead center) There is no "peekhole" in the...

I always adjust the valve clearence on my '94 fc600 to 0.10mm, but the manual for my '06 fe550 says 0.12mm. What's up?, maybe I'll just go 1/8 out, but I like to do both to be sure. :)

can any of you guys tell me "about" how much i can expect to have the valves adjusted on a 98 FC501 there is no noises but i want them checked any way the last time was in washington state by a very good friend of mine but now im here in monterey ca

Will soon be disassembling my engine for maintenance. Are the oem valves 3 angle cut ? If not I have a Neway seat cutter from my small engine repair days which I could clean up the seats with. Thanks, Ryan

'04 450FE - Yes I've read the doc. I had a friend come over to help adjust the valves because I wasn't sure if I was on TDC on the comp stroke. He proceeded to show me how to turn the engine over with the rear wheel until the exhaust valves start to open, and then he adjusted the...

Took out the valves on my 2002 650 Husa. The exhaust valves came out no problem at all, but the inlet valves I needed to gently tap out with a hammer, I couldn't pull them out by hand. When I try to put the inlet valves back in the guides, they wont go in, they are a fraction bigger. Is...

I seem to have managed to brake one of the exhaust valves on my berg... I started it just fine, took it for a test drive in the parking lot. It seemed to lack power, just as if it got to rich mixture... I stopped to start fddeling with the mixture, gave it som gas, and then it just died...