throttle

hey guys, just a quick question. i bought a new fs650e a few months ago and was just wondering how long I have to run-in the engine? she has 700kms on the clock now. (>10 hrs) I've taken it pretty easy until now but my right hand starts to get itchy. When can I unleash the beast? cheeeers...

Greetings all, Recently when I was over at my local shop, the mechanic there Brett, asked me if I had ever checked the TPS on my carb, as every TPS he has checked on Husaberg's and KTM's alike were way off. So, the next time I pulled my carb off I checked the TPS per the owers/repair...

CRF FCR 41 carb on a 2002 Husa. Tried fitting the OEM Husa (2004 + cables) to my carb, but there too short. I can only fit one of the two. If I fit both I can only open the throttle halfway due to the fact that there is too much tension. Is the cable 'housing' on the Honda FCR's different...

Hi! First I have to say that I'm complete newbie with fourstrokes.. I Just bought an 2006 Fe450 it works very nicely exept engine stops when opening throttle quickly. I opened and cleaned the acceleration pump from carburator but that did not solve problem. Where to go next or what screw...

I just put a set on my ktm & thought HMMMMMMMM a set would sure be nice on the berg so I got a set & they fit perfect .About 3" longer which allows you to run them thru the triples & in front of the bars ,especially cool if you want to see your dash .I had just installed a vapor & this was a...

Hi, I´m looking for the correct Throttle valve height Couldn´t find any info :( in the owner-,workshop- or parts-manual & owner doc ... Carb is a Keihin FCR 41 , Bike a FE550/07 Can anybody help?

2002FS650e starts okay on kickstart and idles at around 1500rpm but seems to have an annoying problem that when I roll the throttle towards closed to slow for a corner the engine seems to cut out. When I open the throttle again I can hear the exhaust note change but it's still not firing. It...

hey all - new 'berg owner here. the throttle on my 99 501fe really seems to hit hard just off idle - so much so that it can upset the bike and be really jumpy, especially on the street. the throttle is not sticky at all - it just goes from idle to almost full on in a blink. i've searched the...

There's probably been a number of posts regarding TPS but a search in the Fuel Forum didn't return any results so I’m posting a request for information on the TPS for a 41 FCR on my 05 550. I found that one of the three wires to the TPS broke in two. I removed the TPS to replace it and...

I just purchased a used 05 fe550e. The bike came with the Dreaded Dead Throttle Spot that occurs when the throttle is wicked open off idle. After reading all the posts that an FCR jetting search would produce I spent several hours playing with jetting with no favorable results when I decided...

I have been trying to diagnose a problem with my 97 501FE. I've only had the bike for about 6 months and I'm slowly sorting through various small stuff before I take it out for some remote area woods riding. In short, it is very difficult to control off of closed throttle. It feels like...

All, Doing a bit of research for fuel injection purposes... I ask, because I need to determine where it would be more important to have added accuracy. a.k.a. You don't need to distinguish between 97% and 100% throttle, cause as far as the motor knows, you're WOT! But, for cruising...

If I'm reading page 63 of the '05 parts manual correctly, it appears that the USA-market '05 FS650e does not come with the throttle slide stop, so there is nothing to remove to de-restrict the engine's horsepower. Am I understanding this correctly?

Does anyone know what effect leaving the throttle pot disconected would have,would it make the bike less aggressive or bog down has anyone tried. Thanks Darren

I am with a lot of the guys when they talk about our bikes having a very touchy throttle. One trail I ride on has a fairly steep hill that is about 30 feet tall and at the top of the hill is a sharp 90 degree left turn you must make or you will kiss an oak tree that is right on the edge of the...

hi my fc600 keeps revving when you shut the throttle. only if it has been opened quite far, i was told it was probably drawing air, i took the inlet rubber off and it does not seem to be split, and when you close the throttle you can hear it snap close. the problem has got worse over the winter...

First of all hello!!! I've recently bought a 2001 400 and chuffin love it!! I mainly use it for super moto, but do have some enduro wheels as well. But I have a bad wrist and struggle to get full throttle without getting a second hand full. does anybody do quick turn throttles for Husabergs?

Hi guys any advice. On my 1999fee berg when I shut the throttle (round slide dellorto) the revs take a while to slow down. This is a new problem. The idle is good when it gets there. The valves are adjusted right. I know idle can change which is a sign of tight valves, but this is perfect...

Is there such a modification for us? I really struggle to get to fully open without an extra grab, or moving my grip further forward in the first place. Road racers use a quick action throttle, is there one I can fit to my Berg? Thanks Geoff

Chasing a throttle mechanism mine broke where cable comes into the handpiece before the throttle tube etc. Anyone know what I can use apart from original. Any help would be great :P