This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

throttle

  1. B

    2004 FE450 Throttle cable

    Hi I'm not sure if my throttle cable is standard or whether it has been modified but it seems like it is too short! The throttle cable has always been routed down in front of my bars, I have just put new higher rise bars on and at the same time I wanted to route the cable/s behind the bars as...
  2. N

    throttle to much loose and smooth...

    Hi, Well i came from the previous bergs with carbs and now i bought the fe390 2011, i love the bike but there is this issue with the gas throttle that is toooo much loose...i mean the old ones got a good feeling tight grip when opening gas but this one cause its FI( no springs on intake...
  3. 9

    97 501 throttle question

    Ok long story short, I just picked up a 97 501 from a guy who owed me money. He was moving out of state so he let me pick it up before he left. Ive seen the bike run about a year ago, and all he said it needed was a battery. I replaced the battery, and tried to start it. It sounds like it has...
  4. G

    throttle control

    I find when i am riding a steady pace over rough ground that I can not keep the throttle even. My revs are constantly going up and down a little. I can`t keep it smooth. I know I have read about an answer for this problem but I can not remember what it was, Any ideas?
  5. T

    any alternate source for throttle cables?

    broke a throttle cable yesterday and went to price the husaberg replacement and they are $98!! in comparison, the ktm 350sxf cables are about half the price at $50. does anyone know if they will work on the berg?? they are different part numbers so I have my doubts. I know they both use the...
  6. T

    HUSABERG 570 throttle response

    Has any one noticed the delayed throttle response on the new Bergs I have the 2011 570 And when you wack the throttle on it doesn't respond straight away . So I got the throttle kit which has 4different sized throttle cams what a difference put the 45 cam on and instant throttle response.
  7. H

    Anyone using a quicker throttle?

    Anyone swapped out the standard throttle for a quicker turn model? Where from? How much etc? How did it work out? OEM one on the 390 makes for adjustments with the hand on the throttle when standing up = pain in the arse.
  8. midwest

    BLUE Throttle Cables with inline adjuster

    Hi All, As development from our enduro race team we have now available a Husaberg 4 stroke throttle cable in BLUE with an inline adjuster to allow free play adjustment of throttle without removing the tank! Not only is this product good looking it is 35% cheaper than OEM! We have them available...
  9. M

    G2 Throttle Cam - Thoughts?

    I'm looking at getting a G2 Throttle cam on an 08 450 FE, but wondered if I could solicit some input. I'm looking at the cam to help smooth out the throttle a bit as I get bounced around on the trails - it would seem the flat spot would allow the throttle to be moved accidentally w/o lurching...
  10. 4

    570 Throttle body tuning

    I read a lot of throttle body porting, and some about replacement throttle bodies. Suppose I'm considering tuning the intake - what is the easiest way to go about it? Are replacement throttle bodies easily available? What is the porting to the throttle body - just smoothing the surface areas...
  11. E

    holding back on full throttle

    my berg wont rev out full its holding back like the plug is at fault but its got a new plug put a new stator on from "sparks " it also has a flat spot when i flip the throttle open fast. any ideas anyone :( its a 2003 fe 400
  12. B

    Throttle stop screw mod

    For the guys who have totally removed their throttle stop screws on the 09/10 FE models as per the de-restrict PDF file that is floating around. I just done this and by actually totally removing the screw allows the throttle body butterfly to turn past vertical and actually restrict the intake...
  13. E

    THROTTLE CABLE & BEND TUBE, 03 FE400, KTM PART #?

    I need to replace my throttle cable, including the 'tube bend' on my '03 FE400. Is the cable and / or the tube a common part with any KTM model? If so where do I get the part number cross reference? Getting parts for my Berg is a nightmare in the Toronto area!
  14. Bif

    99 fe400 erratic throttle

    I have posted this question in the electrical area of the forum recently, but I haven’t gotten much of a response. The suggestion I have so far is to check the float bowl spec, I intend to take the carb back off and check this just to rule it out, however while I’m in there I was...
  15. H

    Starting with open throttle FS 650 2002

    My bike start absolutely perfect on the button when cold (Choke on) But needs some throttle when hot (No choke offcourse) Idle is good & also idlespeed is ok after starting Can someone give me a hint here, what's this a sign of ?? Pilot bigger/smaller ?? Fuelscrew has been tried with no...
  16. F

    Hesitation around 1/4 throttle

    Hi all, a few months ago I had a problem when the bike was warm and on tick over, say, waiting at traffice lights, when I tried to pull away it would sometimes cut out when I opened the throttle. I put a post about it and the conclusion was I lowered the clip on the needle one slot, this worked...
  17. pollo

    Throttle Tube

    Can we get an alloy throttle tube for the pre 09 Husabergs ? Haven't found one. I see they are available for 09 though. pollo
  18. K

    chokes when i giver throttle

    hey gentlemen, so my 05 fc450 on idle crawling along if i hammer the throttle she chokes, is this a pilot screw adjustment? bike runs flawless other than this little problem. thanks in advance for the help.
  19. Blunny

    450 Throttle cables

    Gday Just wondering if there are any after-market throttle cables available? thanks Blunny
  20. F

    Has anyone tried a 1/4 turn throttle?

    Hi all, I maybe alone on this one but I find the throttle a bit of a long twist. I have used 1/4 turn throttles before on my old RD350LC and RGV250 many years ago and found them much easier. They take a bit of getting used to, feels like a switch at first, but you can get the power on quicker...