starter

Hi, I intend to replace the clutch starter motor sprague spring, I have now removed the clutch plates but am stuck trying to remove the 27mm nut. I cannot get the locking tabs up, have tried a flat bladed screw driver and and pliers but don't have enough room, any ideas? Also, will the...

Im a newby husaberg owner so be gentle. I have a 2005 fe550 and im having starter issues. The starter is only engaging and turning the motor intermittently. When it doesnt engage it just makes a whirring noise. Battery is fully charged Makes starting a frustrating routine. Ideas?

Can you upgrade the restarter to an electric start on a fe 650 2003 mdl

just a quick one am I right in thinking that if I remove this plate this is where I fit the starter motor it looks to me like someone has done a starter delete on this bike as all the switches are there for an electric start also all the wiring? bike is a 2003 fe501e Thanks for the input!

Hey I have an FE550 and the starter was working fine, albeit the sprague clutch was well worn out... I cranked it a heap in the shed the other night and the battery ran down a fair bit but it eventually started Now it's fully dead, the starter will not click or turn over at all. I have...

Trying to bust into my starter on a 2006 fe450. I can't get the starter to come out! I don't want to hurt the starter or anything by yanking on it. Help a mechanically challenged person will ya.

Okay - I'm trying to 'find the love' for my electric start, FE450 2004, she starts first/second kick reliability but struggles to start off the button? New fully charged battery, checked starter brushes & motor turning at a good speed, checked stator for dirt/rust build up, clean, fitted new...

Ok I've been researching the optional Honda cbr 600/yam r6 starter threads and they all refer to redrilling, adding spacers or longer or shorter bolts etc. All these options don't seem to apply to my bike as the mounting bracket on my starter is at a right angle to the starter instead of the...

Engine is rebuilt and the starter spins strong (2008 FE550), but is not engaging. Instead of buying a new sprague bearing and starter gears, I thought about giving this kit a try Taffmeisters - Husaberg, KTM, Husqvarna, Gas Gas, dirt bikes - servicing, tuning, rebuilds, parts However, I tried...

Hey again guys! I find myself in need of some advice from more experienced people here. A while back I noticed that my electric starter would slip now and then. It would pull the engine over a few turns then spin freely until I let go of the button and tried again, or tapped it a few...

Hello, I just picked up my first bike and first Burger. I have what appears to be common: Bad E starter. Word on the street is: Get parts from Taffmeisters. Replace Starter Sprauge + spring Replace Decompressor spring. Replace Starter clutch??? Then I get confused. Not all of Taffy's parts...

I have a 450 fe that has an intermittent cutout problem with the kill/starter switch and a headlight switch that is barely working. Has anyone successfully pulled apart the light/horn /kill switch and cleaned it? As i need to spend $80 replacing the kill/starter I would prefer to try and fix...

Bought this bike very cheap (in Finland) 2200€ and it was used in enduro riding and so does it look, but its electric start doesnt work. The starter motor works and the battery is new, i think starter button is broken but not sure about the relay/solenoid. In the relay/solenoid there goes 3...

Hi ;) I've recently took my 2002 fe 501 apart to check everything, engine is off the frame i'm going to take it apart probably tomorrow . Bike has 3500km on the counter(?), it was in some guys garage standing for 4 years thats for sure . I've done some searching and not sure what mods are...

Hey guys - 2005 FE 550 runs great but starter just stopped working during a ride - also, headlight no longer turns on with bike off. With the bike running, the headlight pulsates. I just installed a new Shorai battery, which comes charged - no change in symptoms. Main fuse is ok. Seems like...

Hello! Is it ok to leave the small needle bearings in engine case when i remove the starter gears? It`s my "new" -03 450 engine and i have no experience of those modern engines ;- ) Cheers Jampe

Hi all, My 04 fs650 was running great this morning (and it still does when it's running) but it doesn't want to start. The starter refuses to turn it over without a bit of manual decompression, and the motor refuses to start when that's pulled in Anyway. This coming from a bike that would...

Hi guys ! I´ve had my Enduro-Berg for about a year and ran ~40 hurs on this little princess. Prior to me it had been overhauled with bearings and so. Previus owner said that thah was done just before 200 hours 200 was the meters reading for the milage and 74 was for the hours when I got...

i recently bought a used 06 FE 450 e and was wondering if the hours were correct. i pulled the relay fuse to see if the speedo stored the info without power. plugged fuse back in and now all i get for e starter is a click. charged batterey, wasnt low, pulled starter and it turns by hand ok. put...

Hi guys, Im rebuilding my bike and im not going to use the starter motor (kick only) im looking for a blank but cant find anyone that sells them? can anyone shed some light on this? looks around 30mm :D look forward to any replys