spring

Guys sorry if this question has been asked before But how do you adjust sag on a fe 390 Can’t get a tool in to adjust the spring. Do I need to take the rear suspension out to adjust the sag? Or is there another way? Cheers Dan

Hi, So I was riding along and went to shift down a gear. As I do, I hear a metallic clunk and my gear lever goes limp and won't reset itself. Manage to get to where I was going and turn the bike off for 5 mins. Go to try and start it again to get home and the E starter is just whining. Tried...

Hello Took the engine out of my FE650 for the first time (for me) and having a poke around. The link below is a video of the the auto decomp, should the spring be firmer than this? Also checked the cam chain tensioner and it was fully extended to the end "click". So a new cam chain I guess...

Hi Please look at the attached photo after reading below. Background: I had the bike apart forever after breaking an exhaust pivot arm. When I put it back together I think I either did not set the auto decomp spring correctly or it is broken. With engine off the spring should always keep the...

I ordered an aftermarket kickstand and noticed it came with two springs. Curious if anyone's 70 degree bikes came with the small spring inside of the larger one? And what is your orientation of the larger spring's hook, rightside up or down, since each side of the big spring is different...

hi guys, i have an 08 fe450e. I've a broken intake valve spring, later on in the week ill be pulling the head to inspect the guide and seat and make sure the piston hasnt kissed the valve too hard if at all. I have some compression but not much, and the bike doesnt run. i am upgrading to a dvsk...

It came from a 2013 FE350. 6.9 kg and 250mm long. But what does that mean? What weight rider and will this fit my WP shock on my 2011 FE390?

Husaberg 650 2007. I noticed that the spring of the rear shock vibrates when it compresses and extends slowly (for example, when I move the motorcycle while sitting on it. And the shock makes a strange squeaky noise. Is this normal?

Hey Guys, I got this 06 FE650 in the garage right now, one of the intake valve spring broke. I'm replacing them with Dual Springs and of course, we have the choice between Taffy and KibbleWhite. I can't wait 2 weeks for the Taffy ones to come from the UK so I'd like to go with the KB...

Hello folks Trying to set up my suspension on my 2010 fe450 As I weigh in at 123kg I changed rear shock spring to 105nm which gives me Static sag 35mm Riders sag 95mm Rear shock is FE going by part number Should I change rear to 100nm to get more towards the 100mm mark The forks...

Installed new oem 37mm intake valves and kibblewhite black diamond exhaust valves with kibblewhite 96-96000 dual valve spring kit, seated pressure set to 72lbs with 42crmo4+qt spring base "cups"

I can't remember the last time i asked a question instead of answering one! But anyway, what is the spring rate required on the rear of an old Husaberg with the linkage system? SAG settings? Some of your own experiences? cheers Taffy

I was planning to drain the oil and along with the oil drain plug inadvertently removed the plug for the oil pressure regulator valve. Now I have pressure spring and ball (see pic) from the crankcase and no idea how/where to put it back in. Classic case of oil pan full of oil and a few parts...

Hello, I am looking for valve spring for an old FE 350 of 1996 (see attachment) : do you know where I can find some on internet or in a shop (I live in France) ? Thanks. Cyril

Hi ,,, Just bought myself a 2013 husaberg fe250 to replace my old wrf250 ,,, love be the new bike but while out riding a funny noise was coming from the clutch lever ,,, had a quick look and there appears to be a small spring in the clutch lever ,, the Spring looks to be over sprung ( too long...

Hi guys Mite be long shot, thou I try here first before look other option Im after lighter rear shocks spring ple for fe 08 650 standard stamp as 84-250 next one down Im after 82-250 very much appreciate any help .... I want try springs first before I get someone local in...

Hey guys I picked up an 08 FE450 last week. Im looking for advice on spring weights. Im 6'4" and 230 lbs. What do you guys recommend for front and rear spring weights? What is the crossover KTM rear spring part #? Also who do you guys recommend to do a revalve front and rear.

Can any of you guys tell me what oem rear spring the 570 comes with? Id like to make it softer and the current spring says 76 (not fitted by me). TIA!

This has been puzzling me since my engine strip. The stretched out spring is the one I removed from the JBS 660. Any idea why someone would do this?

Whilst taking engine apart I found this little spring any ideas It's 2002 fc550 engine Sent from my iPhone using Tapatalk