spark

With the National Enduros requiring a spark arrestor, what options exist? My understanding is the bike's original muffler does not have a SA. Thank in advance.

read three different sources, all gave different plug types, DCR sends a totally different one to all of em, can anyone tell me the proper plugs for my bikes????/ '98 FC600 and '02 FC600

[please help ive brought a husaberg 2002 model played on it for about a mounth fork seal has gone and theres no spark can any one help?advise me or tell me where i can get this sorted im in the notts area any info would be greatfully recived

Hi all, new to Husabergs and this forum and like most of you i seem to be having spark issues making starting a real nightmare. I've just bought an FS650e 2002 and having checked some of the other posts have checked my stator resistance but have seen different resistances quoted , its a SEM...

hello all, i have now cross referred my loom to the diagram you helped me get- but now i have no spark does anybody know of any common problems 2001 fe400 road legal thanks for your help

been out today bike was going well except that every once and a while it wouldn't start. eventualy it just refused point blank to go and just as a mate turns drives past with a van - lucky coincidence - i find that the HT lead connection to the spark plug cap is loose. now, never having...

Can you add a spark arrestor to the 08 usa husabergs that come stock with the ARKA exhaust?? my enduro club requires spark arrestors. where to get it and how much??

OK, It's been awhile. Built a new garage for all the bikes and NOW, my 15 year old and I are tackling the Huser. It's a 1997?FE350. Everything is there like I mentioned before. I got a few replacem,ent carbs to build one good one. BUT, NO SPARK! Noithing. We have kicked this thing over and I...

Anyone experiment with slight variations of spark plug gap from the standard 0.6 mm? The new one I got was around 0.63 or so and I brought it down to exact. Pollo

Hi My 2000 FE 400 suddenly lost power. No scary mechanical noises, and no loss of compression. When i got it home i found that there's no spark. My original sem stator seems to be just fine, measures 164, and 2960. My new stator is also within specs, - the name of this product will be kept a...

Hi all, I'm a bit confused about the ignition time on my FE550 04. When i look at the explanation of a 4 stroke engine on Wikipedia http://en.wikipedia.org/wiki/4_stroke, i see that out of 4 strokes only 1 ignition takes place on the power stroke. When i turn my flywheel 360 degrees, it...

need sparks onto this one! what and when defines the demise of the flywheel? photos of shagged ones are required here - the more gruesome the better! secondly. having fitted sparks supa-dupa srewound stator what is the strength of the spark? does it start earlier in the revs than OEM...

Hi anyone had trouble with brand new ngks, and is there a better alternative , recently spent a lot of time and money due to a brand new duff ngk plug...... :scream:

Does anyone know where or how to get the sparky insert for the Akrapovic mufflers that are on the 08 US Spec bikes? I hope to go to the 1st 2 AMA National Enduros this winter and a USFS approved sparky is a must. I have a new take-off Husaberg muffler from an 07 but I want to use the...

This will probably sound incredibly elementary for all of you. I wasn't getting any spark and after reading all of the horror stories on here about SEM failures ('02 650) I figured I had a bad stator. I tested it (thanks to Sparks for the numbers!) and found that it was in spec and began...

i appear to have overengineered my old plug wrench i made after giving away my original. i told speaker that i would make him one and after measuring it to cut and weld, i noticed it would be easier just to cut it and drill a couple of holes. it makes it easier to get in and out and also to...

Hello all, Sorry for this new topic regarding SEM Stator but I have read so many posts concerning this subject that I'm a bit confused now, so if anybody can help me it would be nice ...Here are the data of my problem: -I've got a FSE 650 2002 that i do not use very often (3000 km only)...

Been making some changes to the setup with Dale's jet kit. Clip now in 3rd groove down instead of 4th down as recommended. (needle drops to lean out mixture) Adjustable idle air scew at the recommended half turn out. Fuel screw at half turn out instead of the recommended 1.5 turns out. #48...

So, I put a Trail Tech Vapor speedo/tach on the bike and set the spark rate to 1 per revolution. The user manual for the Vapor states that some bikes may fire more often above a certain rpm. This appears to be the case with my bike because above around 6K rpm the displayed revs change rather...

i borrowed a timing light yesterday to check the spark timing (which i have never done before).thinking that it must be close ,but i'll get it spot on. well i shouldn't have checked,because its not even close. just can't quite get my brain around it at the moment. i know cam timing is...