spark

Hey guys so i got a rewound stator from sparks after i sent him my cdi and stator after he rewound it he ran up the tests and said it was all good and shipped it back to me, so i mounted them up and still no spark? my question is what else could be wrong if the cdi and the stator were tested...

I was going to ask if anyone had a wiring diagram for a FE 501 02 as I couldn't find one in the download section under user manuals however found it in the 2001 - 2002 parts manual, plus the exploded line drawings in there are great to use along side the workshop manual / much clearer than the...

Hi guys, New to Husabergs not new to motorcycles. i Picked up a 1999 Fe501 that needed some kick starter work so i fixed it up. now after trying to start it i noticed it has no spark, all the wires are connected were do i go from here. the last owners had the bike for a couple months rode it...

I come from a sunday ride and park the dirty bike in garage... i don't look at it for 2 days and today i wash it, clean the filter, grease bearings and stuff like that. Than i try to fire it up and it doesen't starts... my buddy pushes me around to bump start it but not a single sign from...

can anyone tell me if a stator can go in a heartbeat i started the bike this morning left it ticking over while i did the mixture screw and the engine stalled i thought id done the mix to much after 10 mins of trying to kick it up i looked at the plug i found it not sparking tryed a new plug and...

hey all, I've recently been blessed to inherit a '96 501 husaberg. It is a very pretty enduro bike but it is not running. It sat for almost a year apparently, and had not been started. I had drained the gas, and changed the plug thinking that would solve its issues, but I'm unable to get it...

Does anyone have a part number for a plug cap, bike is a '95 600, plug is C8E. The current cap won't lock onto the plug at all. Actually would this one work? http://www.z1enterprises.com/detail.aspx?ID=426

I'm looking for a Spark Arrestor/Muffler for a 2000 FC501. In California it must be US Forrest approved. Anyway, do I have very many options? Do you know any good web sites to check out? Thanks, Daniel in Vacaville

Hi guys, seems like my -02 650 berg is suffering from a weak spark. I was previously struggling with the e-start and now as paid more attention to the spark itself, i might have found the real reason for ****** starting. Replaced all the e-start parts with the upgraded parts (r6 motor, new...

Hi all my fe400 stopped the other day and i am unable to get it going again all that i can see is that the spark from the plug is very small and some times not there. I have a 5K ohms resistor cap and a standard NKG DCPR8E plug i know the plug is right should i have a resistor cap like this on...

easy question for you experts: what spark plug is the best choice for FE 550 model 2004 by proven experience of course Klaas

Just installed my stator that was rewound by sparks... I still have no spark though :( ... I have a 99 FE400 What values should I look for from the CDI?? I tested the ohms on the stator and they were at spec. I tried disconnecting the orange wire from the kill switch also...

I found someone with an exhuast silencer that was USFS approved for the 01 thur 03 bikes. This is the only place I could find one. http://www.psep.biz/store/husaberg_dirt ... ig_gun.htm

Ive come to check my valve clearance etc for the 1st time today. However ive got to the first step of taking my spark plug out and have ground to an instant halt! The socket ive bought to do the job is slightly to wide to fit between the gap in the engine where the spark plug is. As a...

Hi Steve Does anybody know how to test a coil on a 650 husaberg. Thanks

Hi, Just wondering if any one can tell me the size of the socket for spark plug as i cant find it anywhere in my owners manual and it seems a bit tricky to get to it. So wana make sure i have the right size so im not rounding it of etc. cheers Graeme

been trying to kick start but there doesn't seem to be any spark or if there's one is must be really weak. I started at the Stator first and working my way back. I've tarwled through the forums and the Owner's doc to glean as much info as I can but still have some questions as it's my first...

greetings from Lodz,Poland. I got a 2002 501 fe with a coomon problem from what i have read. just finished mechanical work on the top end, nothing major cfb, timing chain and seals.rode the bike for 2 hrs and it died, lot's of kicking was involved..to make a long story short bike came back on...

2003 fe 400 starts 2nd kick- revs up fine,warm it up, click into gear let the clutch out and it stops. kick kick kick kick kick kick kick no start, get it back in the workshop and now it has no spark?! had a new stator in july and has done 10hrs (ish) since, had it tested...

hi all got my old 92 fe 350 back the stator bolts came loose and the bike quit running i was able to repair the wires i think i got them good enough. But how do you set the timing. I see marks on the stator but won't be able to see them once the flywheel is on.