spark

Hi guys, I am a newb here and like most forum newbs I am starting out asking for help to solve a problem. I recently (2 weeks ago) purchased a very clean 02 FE501. It had been sitting a while and the owner had a hard time getting it to run and when it did it ran like crap, coughing and...

Gentleman, I just bought a 1999 FE600 which when I called the dealer (I reside in Canada) they said they could repair and service. As it turns out they can ony get parts since KTM took over Husaberg in 2004. Can someone please help me out and advise where I can get parts? I may need a...

Any one heard of or tried this plug in a Berg?? What plug would you recomend for 98 fc501?

hello i am new to the forum i just bought a 99 fc501 never seen it run but it was complete and a good price the previous owner said he never was able to get it to run right the first problem no spark i was reading on another post about checking the stator green to black 168 oms (check) red to...

Hi Guys, Been on here stalking for while a while now, read all sorts of posts, some really helpful info on here, does take a bit of digging to find...the juicey stuff The Owners docs etc have been very useful, anyway about 2 weeks ago i took the plunge and bought a 2008 FE450E, supermoto'd, &...

Is it possible to remove the spark plug from an '04 FE650 without removing the Clark tank? The plug wrench will fit, but I don't see how to put a handle on it to break it loose or tighten it. Is there a trick or do you remove the tank? Thanks.

Sorry for asking such a basic question, but where can I purchase a spark plug tool for my 2006 650? When I bought the bike the previous owner lost the tool kit. Thanks in advance!

on road now and no need for any restriction, also like to re pack it if possible. how does this thing come apart? thanks in advance!

Hi All, Got a brand new 2011 FE390 and I went to remove the spark plug for a look while preparing the bike and there's no way it's going to come out. Anyone got any ideas how to get it out ?

Husaberg recommends the NGK LKAR8I-9 Iridium. I bought NGK LKAR8A-9 It's got the older generation tip. Until I get the Iridium type is what I bought okay to use in the meantime? Thanks! I have 2010 390.

Ok, this is a long story, but I think you will find it interesting. As some of you may have read on the “Vapor Lock” post, I dealt with a bad fuel pump for a while. Ultimately, my dealer sent me the pump from his demo bike and that fixed my problem. When he sent me the fuel pump, I had him...

Just received an upgraded stator from Taffy and installed it, and get no juice. I have stripped it down to the plug from stator wires to the coil, ground for the coil, and spark plug lead. No spark. The R-B ohms are only 2600, is this possibly the problem, or am I looking at a bad coil? What...

The thing is, I'm holding my berg in garage at the moment, have been there several weeks now, the weather is 0 to 5 degrees C, in garage same. Anyways, it did start a week ago, installed a new start jet and it started great with choke ON. gave it some Revs, and now, this weekend, it didn't...

Does my 2002 FS650E spark with every rotation of the crank, and as such have a wasted spark? :?:

I just recently bought a 1999 fc501. rode it once, it ran fine, washed and parked. no spark now. cdi ohms out to specs. I've taken the CDI cover off, wire brushed (by hand) the light rust off the stator unit and the flywheel. DOES ANYONE KNOW what the ohm values for the coil? any...

can anybody help??i have a 1999 600 supermoto fe,i have replaced the stator and still getting no spark,new plug to. the only thing iv achieved is bruising the hell out my foot from trying to start it. its got no battery or switch,just good old kick and go,apparently :? im new with the bergs so...

Greetings lads, How "fat" would you guys says a spark should be to be up to spec? It's a bit hard to put a size on a spark, I suppose, but please try! My spark is bright blue / white in colour, so that looks fine, but it's awfully thin. Another guy that looked at it also thinks it doesn't look...

Changed this yestereday and it took ages to get it out, i had to move it about 1/8 of a turn at a time with some pointed pliers, please tell me theres an easier way? I gave the plug a clean and put it back in and now the bike dies when i give it heaps of juice quickly in the shed. I cleaned the...

So I was out for a ride on a local trail, Sand mix grass and loam. when all was going fine. Untill I stalled (or so I thought?) on a sandy section. From hear the 450 just would not fire. Figured it was hot from the sand bagging.... So I Waited for it to cool, No fire,...... Waited etc etc...

.. So I whipped off the Boot to fit my Spark plug exstention socket to do a plug chop and,.... It Dont Fit! I guess theirs a special Plug tool for the Narrow confines, But.. Whats every one do to get around it?..... Butcher an old Spark plug socket just for your Hussy? Dan