size

07 FE450 I was pulling my carb apart to clean it and check for issues, and found that the main jet was stripped. I'm guessing it was cross threaded at some point. I got it out of the "main nozzle" (is that what it is called? Or is it a "needle jet" ?) but the threads on the main jet are...

I'm looking to set up my '09 FE 570 with an SM wheel set. I have a set of Warp 9's off my old DRZ. The guys at Warp 9 tell me that the rear will bolt right up, but the front will not. What I'm wondering is what the difference between my 17" warp 9 and a 16.5" wheel really is? I've found a...

Hi all. I got these boots as a gift and they just do not fit. They have one, 1 hour trail ride on them and that's it!! They are in great shape and only marks on them are on the toe from the shifter. They are a size 8 or Euro 41. Color is black. They will come with the original box. Go here to...

Will a 140/80x18 tire fit on a FE650?? Tractionator Enduro 140/80-18: http://www.motoz.com.au/shop_proddetails.asp?prodID=98 Thanks

Greetings lads, How "fat" would you guys says a spark should be to be up to spec? It's a bit hard to put a size on a spark, I suppose, but please try! My spark is bright blue / white in colour, so that looks fine, but it's awfully thin. Another guy that looked at it also thinks it doesn't look...

I bought a 2001 R6 starter motor off ebay from England. It is a lot smaller than the one in my FE600 1996. Have I bought the wrong one or do I have the wrong bike for an R6 starter motor. Mine starts on the E start when cold but not when hot. I'm half way through checking valve clearance hoping...

hi i am looking to get some new tyres for me fc470 and just wanted to know what size tyres will fit in the swingarm. preferebly i iwll have a 120/120 on the back, is this too big. Nick

Why does Husaberg recommend a 310mm rotor for use with there 6 piston caliper? Every other company uses 320mm rotors and Husaberg also offers a 320mm rotor for use with the stock caliper. Also, will a 17" x5" rear wheel fit in the FE550e swingarm with a 160/60-17 rear tire or do I have to use...

When I received my NEW 2008 FE450 the displayed wheel size (on the computer upon start-up sequence) is not correct. The manual tells me what it should be, but does not tell me how to change it.... Anyone figured out how to set the wheel size into the computer? My dealer does not know...

Please see the attached link. More easst coast we know better than you land grab. http://www.cyclenews.com/articles/off-r ... threatened Here's a copy of the letter that I sent via the linked web site. I edited it slightly to include some pertinent information. As the linked...

Hey been trying all day to find the right rear collar nut socket size . tried 32mm, 1 1/4 " and 1 3/16" and none matched. couldn't find the right size on the forum and the only thing I found on the manual says: "collar nut, rear wheel spindle / M20x1,5 / 80 Nm". what does the "M20x1,5"...

Hello. Is it a 12mm that I need? haven't got one big enough so heading out to buy one. Thanks

Does anyone know what the axle sizes are for an 08fe650? I am looking to buy a set of supermoto wheels. I've done quite a bit of searching but not coming up with a clear answer regarding the 20mm/26mm axle sizes. My first post. . . however been reading a lot here. Just recently picked up...

Hi, could somebody please confirm waterpump seal size, the book says 10x18x4x4.8 !! for some reason they seem to have an extra dimension, help please.

My local dealer F'd up and ordered in a 120/90/18 for the rear of my FE550e instead of the stock 140/80/18. Should I stick with the 120 or ask him to get me the 140..thoughts??

Any downsides to the 100x 57 mm bore on the fe450e, power wise?

yet another question to clarify the doc! have they changed the pitch of the chain and thus the camwheels top 'n bottom? i know froggy brought something up about this? regards Taffy

Hello from Sweden How "long" is the cylinder from the bottom to the top on a Husaberg 501 -99? My cylinder has been relined (rebored) and they took (grinded) of a little bit of the top beacuse the surface on the top of the cylinder was scratched. Hope you understand what i mean since English...

just wondered if we run the same b/e size throughout and indeed what size is it? regards Taffy

Anybody knows the size of the valve adjustment locknuts on the 2001? Danke schoen.