size

Just wondering what you guys think is the best size sprocket to use on a 450 supermoto, currently got a 44tooth and think it would be better with a smaller one to make it abit better top end

Hi, I have a 2011 Husa FS570 The rear rim is 4.25 which calls from the factory for a tire size of 150/60/17 I found a sweet deal on a Q2 tire thats a 160/6017. I will save about $50 total after mounting if I go with the 160, over the tire I was leaning towards the Pilot Power in the...

Anyone know this for the US version? The shock spring size is easy to see, but what is the size of the stock fork springs? 3.8, 4.0, 4.2, 4.4, 4.6, or 4.8? Anyone by chance able to decipher corresponding rider weights?

what is the spindle nut size for the primary nut (front sprocket)? 07 Berg 550 FE

08 FE450, not sure about the length of the chain I have at them moment but it's not long enough (I'm not sure if how many links it has) What length do I need? any recommendations. X ring or O ring? Thanks

Looking to do a oversize valves for my 2004 FS650 looking doing 36/31 vs stock of 35/30 any thoughts. The kebble whites valve are for a ktm 450 oversize black diamond stainless steel , anyone tried this combo????

(For an '[08 FE450) I bought a new foam air filter- No Toil. Looking at it in the packaging, it looks smaller than my stock foam. I can't tell for sure, but I don't want to open the package and not be able to return it. I don't want a smaller filter- my jetting is spot-on, and I don't want to...

I am going to install an inline filter which will replace my broken quick disconnect fitting. But i need to know what size the fuel line is. Looking at the Golan mini or super mini cleanable 10 micron units. Also can anyone recommend a good dealer in the northwest U.S. 2009 fe570 Thanks

I have a 1998 fc 501 that I ride for work an play wAnt to set it up super moto style just don't know what wheel an tire sizes to run?

Hi, quick question, searched and couldn't find an answer. I Have a 2012 FE390 the rear's fitted with a 140/80 with an 18" x 2.15" rim I recently purchased a Ultra Heavy Duty tube for the rear but the tube has 110/100D - 18" written on it. Will it still fit? do they make tubes 140? or is it...

My first Husaberg, 2011 FE 390, came with 52 tooth rear sprocket. Not sure if its just me but seemed second gear lacked a little zip right off the bottom in the slow going stuff. Should I add 1 tooth to the rear sprocket, make it a 53 tooth or would I even notice this ? Also my front...

just picked up a new 09 570 and the factory chain has stretched beyond the adjustment range, it is a 118 link and gearing is stock has anyone encountered this ? and will a 116 link fit with the adjusters all the way in ?

whats the standard OEM piston size for a 04 650? the wossners are 99.95mm, cant find a size in the workshop manual for the OEM one. thanks

Hey Guys, I am not sure what feat of physics allowed me to loose the seat screw for my 08 fe450 but it came off on a ride over the fourth. I called a dealer and they want $36 for a screw with a swivel top. That is a no go for me I will just use a wing screw for it instead. I need to know the...

I have a 04 fe450 and I want to put a inline thermostat adaptor in the radiator hose What is the ID of the rad hose?? The radiator does not have the fitting for the thermostat Trail tech makes them http://trailtech.net/media/catalog/TT-CAT-10_lowres.pdf Thanks Frank

Good evening to one and all, i'm after some help, just sourced a set of 17" super moto wheels and tyres for my beloved 450 FE, it has been running the standard off road set up i.e 21" front wheel. The speedo head is set up to the 21" wheel and is calibrated to 2205mm the circumference of that...

Hey just wanted to verify as i havent recieved my 2010 husaberg fx 450 yet what size are the handle bars so that i can order my guards thanks

Just wanting to make sure before I buy a chain what size I need. I have 15 tooth front and 48 tooth rear on my 2006 Fe550e I'm thinking Regina O-ring. Will I need 120 links?

i have a 1998 fe 600 enduro /dual sport california edition. it came with a edlebrock quicksilver 38mm h flat side carb. instead of the dellorto carberator that came on most of the bikes. it was a emissions thing with california. i am being told by my shop that i need a new jet for the edlebrock...

I'm looking at getting either moose hanguards or ego handguars.I have stock bars on my 2005 fs650e, there renthal bars. what kind of bend are these bars, what mounting kit do I need to buy. the EGO's list acouple of different bends and bar size?