rocker

Hi, trying to iron out some it's n bits on my 2009 450 FE. Traced an irritating oil leak to the rocker cover. But contrary to my initial thoughts that it was weeping out of the bottom left it now seems it's starting in the seam on the left hand side a half way up. I can actually see it bubbling...

Wondering what the correct setting on the external rocker arm is supposed to be. There's some black wear on the nut underneath where it sits, suggesting that it was supposed to be touching / resting on it. At present, I've disconnected it (up at the lever end) until I figure this out. So at...

Adjusting my clearances 1/6th turn but the exhaust side rocker arms don't move or click like the intake ones do... Can't be right can it?

My rocker arm shaft had to be replaced so Im replacing it with the ones from a KTM 500 2012. The reason is that they have a machined flat line along the shaft so more oil can flow for lubrication. Same price, same dimensions but a bit better due to this. Just a small tip. The new KTM shaft...

Hi everyone. I'm new to the forum and somewhat new to Husabergs. I purchased a 2009 FE 450 last year and will be running it in the Mexican 1000 in a week or so. The issue I have is I need to add a positive on/off switch to kill the bike in an emergency. I have the usual push starter and...

Pretty in Stainless innit! I've had a few made; they'll be 15 quid each (plus in the EU). regards Taffy

Hey guys, Sent my head off to Thumper Racing for a port job. While I am in the head/rocker cover I want to replace the rocker arm bearings, maybe cam bearings and use a Regina timing chain (Regina was recommended by JBS) Anyone have the rocker arm bearing size and the Regina timing...

Hi guys, my rocker shaft seized to the rocker due to the crankcase oil strainer clogging up with clutch material and lack of oil to the head. I need to figure out a way to "extract" the shaft. Throw any ideas you have a me. It's soaking in penetrating oil atm and I have tried using a slide...

Well my 99 FC600 started making a whine in the topend last weekend. Changed the oil today and had a lot of small metal particles in the oil. Pulled the cover off the head and one of my rocker arm rollers was shot, ate up the side of the cam lobe which appears to be where the metal in the oil...

Official Husaberg Bulletin #HB-01-03 Rocker Roller Checks For 2003 Husaberg FE 501/650

Cylinder Head with valves and springs working perfectly when it was mounted. And Rocker Cover with rocker arms and bearings in good shape. Cylinder Head with valves and springs----->80 € Rocker Cover with rocker arms-------> 40 € Everything ------->100 € All of this parts are...

Okay so I have a 1997 FE 400 that has a busted rocker cover and I am having the worst time finding parts for this motor. Could anyone tell me if I could use a rocker cover or any parts for that matter off of a different year model or different displacement husaberg? Or possibly even if I could...

I'm trying to find parts for a 97 fe400. I'm having no luck so far, if someone on here could point me in the right direction that would be awesome. I need a rocker cover and a few miscellaneous other parts.

So a bit of back story before I get into it I was having major problems with the bike fouling plugs within minutes, so I decide I'd take the plunge and change to the FCR ditching the problematic dellorto, had troubles with the switch but finally had it running and running well with the FCR...

some will have noted that the 1989-2003 rocker shafts have stopped. the later 2004-8 will fit instead but there is no oil feed. all I can suggest is that you drill out the hole on top of the rocker arm and give the entrance a nice bevel to catch as much splash as possible. if it is...

Hello ! Are the exhaust rocker arms from a 650 2003 the same as the 2001 ? Thanks

Hey, can you tell me if intake and exhaust rocker arms from 2000 400cc will fit in 500cc cylinder head? Or how much milimeters are they different? Thank you. :)

Hello my names Alex and a proud owner of my 2003 Husaberg FE 400 E. Ive looked on this forum plenty but have never made and account and needed advise. Me and my dad have taken apart the bike after finding some needle barrings while draining the oil... Seems like the rocker roller barrings are...

What is considered normal play on the rocker arm bearings (axial) and axial play on the rocker arm itself when the shaft is in and installed on the head? My 570 today started to make some top end noise when idling. Heard it for the first time when I ran the motor pretty good and hot. It's like...

Hey can't describe it right, the swivel ends that sit on top of the valves at end of rocker arms, 2 have a fair bit of movement, a lot I think, TAFFY do you sell these as a Replacement??[attachment=0:1s9mf85v]image.jpg[/attachment:1s9mf85v]