replacement

All, Well after 100 hours the water pump seal started dribbling out the weep hole. I got the parts to replace it, clutch cover gasket, seals, pump housing gasket etc. The new seals do not have the metallic outer that the previous generation had, and the oil seal has little spacers on it to...

can anyone advise me on the chain and sprocket replacement for a husa fe550 2004 I ride enduros. do i really need O,Z or X ring? or a lighter motocross type? what type of chain (or spec) should be on a fe550? 520?

Hi All, My 05 fe550 forks are in need of a rebuild, looking around I have found a pivit works kit that will repair 07 forks. Cross referencing part #'s on bike bandit it apperares the outer tube bushing is diffrent between the 05 and 07. Could somone explain the diffrences or confirm that 07...

Ladies and Gentlemen, I am happy to announce that some partners and I are currently in the process of pre production testing of a complete subframe fuel tank that will hold apporximately 1 gallon of fuel. This tank will be a complete unit, that is made to be a gas tank and will be a...

Looking for a seat cover for my brothers FE 2008, original is of poor quality, wich after market cover is recommend?

I'm new to this forum although I've had a '97 (roughly Pleistocene era) FE 400 Elduro for getting on a year and a half. The poor girl has just lost her spark, and it looks like the CDI/Coil. Does anyone know if there's a cheaper replacement than the $167 OEM unit? Thanks for any ideas...

With less than 20 hrs on my last cam chain replacement. I broke another one this past weekend. I am thinking that it was my "at home" chain rivet job quality. Now I need to check the valves to see if they are bent. I am thinking of just rotating the cam and checking the valve clearance. I...

Has anybody ever replaced a seat cover? The one on my 03 is looking tired so I got a new one off eBay. I have a few questions for anyone in the know: - How do you remove the bushing seat (i.e. bushing for the seat screw)? - Do you recommed using an adhesive on the foam? If so, what? -...

So I got a cam chain, and valve rocker arms, and a local engine guy is doing the work. He's very experienced with ktm, but not so with husaberg. Apparently on some ktm's it's necessary to remove the head to replace the cam chain. Is that so on the berg? Anyone got a link to a quick outline of...

Hi All, I picked up the bike yesterday and it needs a new battery. I looked at the bike quickly and did not see an easy way to get the battery out. Is the best way to remove the rear shock and remove from the rear? Yes, I am a total newb with these bikes. I am hoping to sell my Honda...

Bike in question is an 05 FS650e Had a bit of a search around but could not turn up much. The vibratey bastoid vibed itself off the stand warming up in the driveway while I turned my back to shut the garage door. Bar end and clutch lever ate the dirt but the gear lever managed to eat...

Just as the Canadain crew gets ready to jump on the plane for Austria to have another crack at the Iron Giant in Erzberg, top Canuck and new Husaberg pilot Shane Cuthbertson breaks his ankle. :( :? However, race team manager and all around saint to the off-road world, Fryguy, coughs up a...

Hi guys can anyone tell me the type of cbr 600 starter motor and husaberg starter bracket I need to replace my 2002 470 starter as it is a slow to turn over Can you tell me what up grade I need for the auto decompression syatem Ian

I ridea a 95 501. Ok heres my problem. I broke a valve and it tore up all the insides. I ordered a cylinder from ebay. The ad said it was for a 94 501 and somebody on here told me it would fit right in. Im hoping this is true. Anyways, I received it today and its for a 350cc. Im wondering if...

The stock thumb switch on my 2002 FE501e is shorting to ground whenever the lights are turned on, killing the low beam, running light and brake light. The problem is in the switch itself which is hard sealed. The factory replacement for the switch is a complete wiring loom for $180 with the...

Hey guys, I am curious, how much cash should I expect to dish out (in US dollars) to replace the camchain, camchain sprockets (steel ones) the stock is aluminum on mine, and to update my chain tensioner on my 2000 FC501? Also, who would be good suppliers for parts? The last part that I ordered...

Alright, now I have all the parts and the time to fix my Berg, since my rocker cover exploded. I have the upgraded cam chain, along with the new plastic tensioner arm and the new tensioner itself. What steps and precautions do I need to take when replacing the cam chain, so I do not mess...

Hello all I searched and came up with nothing, is there a replacement tip or extender for the rear brake out there, has anyone done this yet?? Seth

okey dokey after spending mass amounts of cash ($704) on a stator I found it came with a fly wheel. Does this really need replacing as I haven't had any issues over the last weekend (10 hours of riding). I also have a problem with my headlight. There's no power getting to it. The switch is...

hi guys, just few minutes ago i manage to start my 1994 fe 600 WITHOUT the freaking charging coil :D :D the charging coil (black and red leadings) is always the one that gets open and causes all the problems at the sem stators. i only used 1 component for this operation and the results...