replacement

hi guys.i bought my first berg a few wks ago.550fe 2007.but the coolant is coming out the weep hole so i bought the o ring,seal,gasket and bearing.i took all apart today and im havin difficulty getting sorted.can any one tel me exactly watvto do.i have the new bearing in the cover an its sitting...

Does anyone have a part number for the stator or know of a replacement stator & part number? Also does this bike have a cdi, if so maybe a part number for it too? I have a chance to get on from a biddy with very low hrs & this is the reason he is cutting it loose. If i can find some decent...

Hello:) My bike is a Husaberg FE 450 from 2004 My conrod was cracked and my engine is... a crap, looks like a cheese. But this is a different story:) I have to have new connection rod, but brand new costs 500$ or 402 Euros. I want to buy replacement conrod or maybe used, but i don't know...

I have a 1999 FE501. The Coil & Stator have just been replaced. It is now relatively easy to bump start but it is near impossible to kickstart. The Coil is a Genuine Husaberg Coil p/no: H25021602. The statour is a Electrex World Stator p/no: ST5500L. I had the same parts replaced about 2008 and...

hi guys does anyone know anywhere in the uk who sells 650 engines as mine as died could probably repair mine but seeing as i have never worked on a husaberg engine i dont want to take the risk i just want to replace it and keep my old engine to learn with a possibility of having it fixed as a...

Looks like i will soon need to replace the cam chain on my FE400. Is there an easy and hard way of doing this ? Also to test the tensioner is it just a case of un bolting it from the engine ? I`ve never done one but want to give it a go. Cheers Bob.

Hi there! My search did not reveal a lot; is there a cam chain replacement how-to which I could consult when replacing the cam chain on my 2007 FE550? Can one simply use a cam chain link, connect the new chain to the old one via the link and pull the new chain through from the top of the...

Has anyone taken one of the new KTM fuel pump systems and used the pump to swap out your failing pump? I have got a 10 570 that the pump has started seizing up when hot just like all the others. I have a got a line on a complete KTM pump setup but it is very different overall design. The pump...

After a day out at the local mx track the other day - noticed the tell tale clunk of a dodgy bearing when I pulled the back wheel over from the top. I've only just done the wheel bearings so it's probably not them... It's not a big clunk but there nevertheless. Can't really see where the...

Do I need a press to change the swing arm bearing? http://www.bikebandit.com/2010-husaberg ... #sch656444

The battery has finally given up on my 09 HFE450. What is the process for removing it? i have taken the 2 screws out of the black plastic cover.. do I have to remove the fuel tank or is there something obvious I am missing?

Hi Guys, Long time reader first time poster. Have myself a TE300 which I had a bit of a stack on and now need to replace some plastics. Is there a company anywhere that does plastics for these bikes? Or Do I have to go genuine plastics? Am in Australia but happy to purchase anywhere in the...

Newbie here :) , Taking delivery of a slightly used '11 570 this weekend and starting to think about getting some extra filters, I've searched and cannot seem to find if there is a No-Toil or another aftermarket filter available for the new 70 degree motor. Any info appreciated, thank Howard

Hi all. Enjoying my first berg, a 2010 FE450. Somewhat crushed my right side radiator on Spruce Trail in Left Hand Canyon (Boulder, CO). Anyone know of an afetrmarket that is anything more reasonable than the $400 for OEM? Hell of a ride by the way. If you like 5MOH, you'll love it...

I grabbed this key replacement in hopes I could use it on my 2010 fe... anyone wire one of these up yet? How's you go about doing it? http://sicassracing.com/store/index.php ... cts_id=313

I am looking for an automotive or aftermarket replacement fuel injector for my 09 FE570. My local dealer doesn't have one the Husaberg one in stock and I need the bike ASAP. Someone posted about a crossover previously..................will one of the KTM injectors work?

i am about to replace a blown head gasket with a valley force copper gaskett can someone tel me head torque preasurer and do you require a soft link for the timeing chain any info thanks negy

I have just orderred a 12 tooth front sprocket for my FE390; can someone confirm that: - it is 'turn clockwise' or 'anti-clockwise' to get the original one off, and, - what torque do I tighten the new one up to in Nm; do I use loctite? (my other bike a Husky 610 sprocket is held on with only a...

Ok so I'm filling up my Berg at the gas station and left my beautiful Husaberg alum billet engraved gas cap on top of the seat and drove off! Dumb dumb dumb :cuss: Went back next day couldn't find it and station mgr. had no clue. Lucky I had a spare Acerbis cap from the stock tank and could...

Hi everyone, simple and basic question but............ Just replaced the standard fuel cap on 09 570 with the factory alloy cap and short breather hose. Wondering what I do with the grey nipple on the head stem that had the old standard breather hose from the standard plastic cap attached to it...