replacement

Will any other year kickstart shaft work for a 1998 FC600? Ideas for finding 98 parts?

Hi all it's time to replace my clutch on my 2010 FE450 as it seems to be dragging and I wanted some recommendations. Has anyone used the Tusk clutch kit with friction plates, steels, and spring with any success? It's a bargain at about $60 but am I better off going oem? I have over 200 hours on...

I came across this Products for Motorcycle 2001 Husaberg FE 650 E Euro | RMSTATOR.COM Made in Quebec Canada Price seems good. Has anyone tried one?

Hi all! It's been a while since I've asked a question on my 2010 FE450 but here's the story... I rode a 550 mile dual sport through SD last week and all through it I could hardly turn the bike, it wanted to go straight and gave me a very unplanted loose feel when turning. So after looking at...

Looking to replace the rad shrouds on my 390: am I limited to genuine parts or are there aftermarket shrouds from Acerbis etc? I've looked but not seen any. Thanks Steve

Cracked my LH radiator today. :mad::mad: So.... obviously I'll need to replace it, or both any suggestion on where I can get hold of some? Based in Australia but happy to purchase from OS Cheers Rusty

I have to replace my sight glass.... any advice or pointers? ? Tks fred

Hi all, Left my heated grips on for a few months and guess what the battery is now dead.:o Wont seem to respond to the optimiser or anything so im guesssing its totally knackered. Looked around and they seem mega expensive off the dealer 130 quid. So does anyone know if the ktm ones are the...

I've broken the connector for a fuel hose on the regulator and so it looks like I need to chase down a replacement. I've had a look on eBay and found a few - KTM SXF250 350 2011 12 NEW Fuel Tank Pressure Regulator 75007088012 KT4139 | eBay 2009 KTM Duke 690 LOW Mile 1K LC4 Fuel Pressure...

So as to not be different than everyone else, the fuel pump went on my 2010 FE390. As per the recommendations on this forum I have ordered a CA Cycleworks replacement. Before I start taking it apart this weekend I have a few questions: 1. Are there any other parts I should replace when I...

Hi Anybody got any idea of the cost of the main bearing replacement on a 2002 fs650 if done at the dealers as mine has just gone thanks

my 06 fe 550 has started to weep threw the weep hole after 365 hrs on the orangeberg wh kit now i need a replacement seal can this be purchased from dealer or is it speciel for the wh kit

Hi all, I had a run in with a tree today while riding through some ST. Nothing major, but it broke the high/low/off switch for my headlights (KTM part 50311070000). I'd like to replace it with something a little more rugged, and I really don't need the indicator, horn or kill switch. Highway...

I am looking to get a couple of spare air filters and I can only find 1 Twin Air filter on e-bay but there are several from HiFlow. I have never used HiFlow before and was wondering whether anyone here have used and their recommendation on it.

I have looked everywhere for the specs on my ignition coil and have been unsuccessful. Do anyone knoe what a good replacement ignition coil would be? Add a link if you do please

Hey, I'm about to replace seals and oil in my 2011 FE390 front forks for the first time, and I have some questions to the forum- 1. Recommended guide or video? 2. What fork cap tool do I need? A standart KTM will do? 3. Recommended seals? thanks!

Hello! My bike is afaik "a real supermoto", not a converted one. It's an 2004 FS650E. My local Husaberg dealer wants to sell me partnr 80009060000 for somewhere near $575. Are there cheaper versions of this rotor? Are there any downsides to using cheaper rotors? I've looked on ebay, but I'm...

Hi all, I'm looking to replace the chain on my 390 and was wondering what options are available? As you all know the stock is the DID VT2, and for some reason best known only to the local importers, I can only get it in gold, yes that's right, GOLD!! I mean seriously, who wants a gold chain on...

There are a number of threads on this subject and I have looked into sourcing a decent Lithium ion batt in the UK without success. I'm keen to give these a go especially for the weight saving. My FE390 has a yuasa YTZ7S and one of the terminals is knackered and so the battery needs replacing...

I've gone the route of cutting my stock stand. I am unable remove the foot so now I've got a useless stand. I need a direct replacement for my 2011 FE 570 WITH motard wheels. And I need them fast, help!