replacement

Dear community :) I finished the assembly of the engine. I replaced every parts of the carb. Identical to origin except main jet which was not available at 185 but 190. I have check the clearance of the valve to 1/6 turn méthods. The ignition plate set up is controlled as described in the...

Can someone make a recommendation for a chain roller replacement (part number 120 056-01) for my 2002 Husaberg FE650e. I checked with the local KTM dealer and he could not find the part number or my bike. I found plenty online but without measurements I cannot make sure it will fit. Seems...

Where can you buy back fender, side panels and radiator shields. New to forum. Help out a rookie

Hey guys. I recently opened the side cover on my 95 FE501 after having some shifting issues and first gear being completely unusable since I purchased the bike. I found several gear teeth laying in the bottom of the pan. I’m figuring this is why first gear wasn’t working. I’m curious what...

Recently looped out and broke the shift lever in half so after googling and searching i cant really find anything that definitly fits. Anyone tried KTM or the '09+ models shift lever on older models? I need one for my 08 450 Skickat från min SM-G950F via Tapatalk

Hello, Can someone tell me if I can replace the impeller w/o removing the clutch cover ? Thanks

Hey all, After breaking and welding my sidestand several times (such a poor design), I figured I’d just bite the bullet and get a good replacement. The trouble is, all of the replacement side stands I can find are listed for 2009 and up bikes. Do you all have any recommendations on a...

My speedo/hour meter has been on the fritz for a while, and finally went out (2010 FE450) on my ride Saturday. I assume replacement is a simple plug-and-play? Also - I thought I heard before that it isn't powered - could this be as simple as changing the battery within the meter? Suggestions...

This bike followed me home a few weeks ago. The engine was partially disassembled and there's no way of knowing why. Bit of a sad story, too, as the original owner lost his life in a vehicle accident in 2011. The bike was given to a friend of the deceased as he hoped to get it fixed and...

2011 fe450: Need a new fork- what are my Options? Please help: I just bought 2011 fe 450, first dirt bike in 15 years, only have 3 rides on it. Then, I put it down in some rocks and ovalized the upper and lower on my left fork. The OEM parts are $1,800!! I can’t justify that kind of cost on...

Evening all! Does anyone know if anyone is making /supplying conrods for the 644 motors of either length? That question has been raised elsewhere regarding the 550 motors as well. Cheers.

Hi, Took the 2 x covers off the lower joint/bearing. Bearing itself looks and feels good (no radial, lateral, or longitudinal play). But I damaged the two covers in the removal. Don't need the whole bearing replaced - just those two cover rings. Looked high and low, and can't find those...

Been a while since ive been here. How is everyone? Trying to find a aftermarket stator with a higher output so my battery will atay charged while running a fan. Trail tech??? Thanks Bob

Any expirience husaberg 650 replacement ignition units?

Hey husabergers, I am replacing my counter balancer bearings, and as i see my bike only has 1 bearing and not the double bearing. I have bought 2 custom made bearings from orangeberg, but i cannot remove my current bearing. I have warmed up my counterbalancer to around 170 degrees celcius...

Hello! I suspect to have broken a piston ring. I have oil dripping from the exhaust port and when I rev the bike after leaving it on idle for a while a lot of whitish smoke comes from the exhaust. I need help on deciding what piston to get for the bike. I have read here that the Wössner...

Hi guys, i am looking for a quick reply, cause I am stuck with no clutch and I need the bike urgently... :( On my fs 570 2011, I ended up with no pressure in the clutch lever, no leak on the MC, but he was empty..so after reading many threads here i concluded it was usual issue with the slave...

1998 FE400 with a Mikuni flat slide carb. What throttle cable do I buy?

Hello All, I am looking for a good replacement chain. I was looking at AFAM Chain. Has anyone every heard of this brand? let alone used one on their Berg? What is better XS-ring and O-ring chains or neither??? any Info would be great! :)

Can anyone tell me if the newer year stands would fit my 05 reg fe? The oldest replacement on eBay would be 09