This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

rekluse

  1. R

    REKLUSE

    Am new to the sport after a long layoff from old school Motorcroo back in the day ( early 70's). I don't understand the Rekluse clutch and how it works and want advantage it gives. Any insite would be appreciated .
  2. M

    Rekluse for 570. Which one?

    Sorry if this issue went up already, but 2 hours into searching and I couldn't get the info. So I'm getting my 570 in couple of weeks and thinking into Rekluse pro. On Rekluse web site there is no reference on the 09 models. I've been reading here that it's the same like KTM unit but with...
  3. V

    Rekluse and Cush drive questions

    A few of you have mentioned on here that a Rekluse is unsuitable for Supermoto. Why is that? It seems to me that a Rekluse would disengage when you close the throttle, giving you absolutely no engine braking. Isn't that a good thing? A left handlebar mounted rear brake could be modulated to...
  4. P

    rekluse

    well just put the berg through its paces hard.I gave the rekluse clutch some punishment (the jury is still out if i like it or not)I tell you what is good though I put the rear brake where the clutch lever was took a little of getting used to but i do love it ,full controlled power slides.She...
  5. O

    Suttos Demo Day Ride report 09 Berg and Rekluse auto clutch.

    Sutto Demo Day went well. Here's the link to the ride report. http://www.eatmydirt.com.au/?m=article&id=473. Some may have to get over any pumpkin allergies, or just read the bits on the Berg.
  6. K

    2009 Rekluse clutch question

    Ok so as it appears my 09 is now only a matter of a few weeks away, my thoughts of have now turned to setting it up. I put a scotts steering damper, a bash plate, alloy radiator guards and a Rekluse clutch on my 05. I guess the alloy aftermarket parts will take some time, and not really sure...
  7. D

    Rekluse settings for 2007 FE 550

    Hi there. I just purchased a z-start pro for my husaberg an wanted to see what settings folks are using / what's ideal. I know much of it is personal preference, but would love to hear some advice before installing. I ride a fair amount of desert, but also do a fair amount of singletrack...
  8. S

    01 FC 470 - Rekluse?

    Hi All! first post here. Looks like a good informative site so far... I just picked up an 01 FC 470, and would like to install an auto-clutch. I just got rid of my KTM 300 EXC with a rekluse, and seemed to have forgoten to how to use my left hand. thanks Aaron
  9. P

    Rekluse

    Hi guys have just bought a second hand rekluse that has ten hours use on it from a person in Queensland(Australia) it is the pro,it came off an fe550 but i have to get another add on piece for the 650 the joint in Sydney ,the Australian distributors of rekluse cannot get it for a month .Can...
  10. Mackberg

    Rekluse clutch for 97' FE600E

    Anyone know if Rekluse makes a clutch kit for a 97 FE600E?
  11. L

    Rekluse top screw removal advice?

    Alright, the Rekluse kit comes with a Torx bit and that is what I used to screw the 3mm Torx screws at the top. After putting the bike together I realized the stupid kick start recoil spring had come off (I should have checked before putting the clutch back on, I know). So I tried to...
  12. L

    Just received my Rekluse

    I just received a Rekluse for my 501 as part of a trade and it was a good deal for both parties. Now I just opened the box and it looks like a nice Chinese puzzle, which is fine. I got the instruction sheet, it seems to be step-by-step. Any suggestions before I embark on this endeavor...
  13. J

    Rekluse auto clutch.

    I just installed a Rekluse auto clutch on my 02 fe501 today. While I had the clutch cover off I was able to look and the condition of the cam chain,etc. I had read in the doc about needing to replace the aluminum chain with a steel one but it looked as new. I was wondering if I should worry...
  14. Sean

    Rekluse z-Start Pro

    I just received notification from Charles at Rekluse that the Husaberg version of the z-Start Pro will be ready in late June: "Sean, In late June corral those Husabergs because it looks like we will have some clutches for them; pro clutches that is! So I will keep in touch and well see what...
  15. T

    Rekluse for fe450

    Thinking about installing A Rekluse on my 06 fe 450. Anybody else haveone on a comparable machine? Should I wait for the Rekluse Pro to be available for the Hussy's?
  16. S

    Rekluse Z-start clutch

    Hi, Has someone experiences with these or any other automatic clutches on a Husaberg 601 (or up)? I've a 601 engine installed in a sidecar and I'm especially interested about oil temp and clutch life. Is there still some bite left when opening the throttle? Stephan
  17. L

    RevLoc vs Rekluse

    What is the difference between both autoclutch devices? The RevLoc is twice the price of the Rekluse. Is it better built? Easier to install? Easier to set up? I'd hate to have to remove the clutch cover 5 or 6 times until I get it right, it's a bit of a pain on the 2001! Also I am...
  18. R

    Help with Rekluse tuning

    Well I got my Rekluse for my 04 550 and installed it last night. Bike started right up with no drag at all, idles great and seems to have good hook up (no slipping) however, I opted to keep the clutch lever but it does absolutly nothing at the moment. limp throughout the pull. the bike is...
  19. S

    Rekluse clutch on eBay.. FYI

    I ran across this Rekluse clutchwhile doing a search for the bike I'm getting next week. I hope this forum is ok. I'm not selling it myself and have no ties to the seller, so it's just FYI. Please feel free to scold the new member if I'm breaking any protocol.
  20. andretheox

    More Rekluse Questions

    I have a 04 Fe450 and my dealer here in SA fitted the rekluse. After about 25 - 30 hours of riding it started to slip all the time. So I had it taken out 1) as I am getting a 2005 Fe450 and 2) I was worried about reliability. I would like to know 1) is it possible to fit the rekluse to the new...