rekluse

Husaberg

Help Support Husaberg:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. K

    Another Rekluse question

    Reading the other threads on here about the trials and tribulations people have faced installing the Rekluse clutch, it seems that most people are removing the clutch lever, or turning it into a left hand rear brake. Can you just use the clutch lever as a manual over ride on the autoclutch...
  2. andretheox

    Rekluse fitment questions

    FE450 E 2004 1) Must the spring in the clutch slave cylinder piston be removed or not ? 2) In the diagram illustration of the parts there are 2 Bellville washers shown but in the parts list there is only reference made to one and later in the instructions they only mention 1...
  3. gruntunberg

    first race on the rekluse

    After a few late nights changing clutch plates and springs got to give the rekluse a quick blast on the dirt before doing a 2.5 hr hare and hounds at Lings farm . A few keen dudes walked the course on sat and reported lots of root,s tight wood work just what the rekluse would like , early start...
  4. Gix

    Rekluse clutches

    Hi Guys. I have just installed a rekluse auto clutch in my 04 650. The standard clutch lever has been removed to help me get used to it. I followed the break in procedure as per instructions but find the bike creeps slightly when in gear. According to the instructions this can happen and it...
  5. Gix

    Rekluse auto clutch

    Hi , was wondering if anyone has any experience of the semi auto rekluse clutches. I know how they work but as I not ridden a bike equipped with one what I would like to know is... do they also act like a slipper clutch on downchanges. Would anyone recommend one... for supermoto use. Would...
  6. B

    Rekluse Z-Start auto clutch

    Hi guys, I wonna try....well, at least I`m thinking about it.....a Rekluse Z-Start auto-clutch on my FC 600. I ride mostly mx! Has anybody some experience with this clutch-system? How does it feel? How does it hold up? Does it affect any other mechanical part on lifetime, maybe the...
  7. Sean

    Rekluse clutch for'03FE400 some teething issues

    FYI, for any one looking into a Rekluse for an '03 FE400, the kit is currently wrong. The clutch Rekluse sent to me does not allow for a clutch with sleeves, rather, it is for the '02 design of teeth on the inner hub. Sean and Patrick at Rekluse are feverishly working to get the spec updated...
Back
Top