rekluse

Hi all Husky/Berg fans. After changing clutch friction plates on my 570-12 the clutch no longer works... (Before OK). I have rekluse EXP2 and of course I thought I had done something wrong but all seems to be correctly installed. The right no. of friction and steel plates (6pcs) are installed...

I have installed the new Rekluse Core EXP 2.0 with the slave cylinder, but how can I adjust the Rekluse with the slave cylinder when the case guard is hiding the hex hole on the slave cylinder. (Husaberg FE 450 2009) In the manual they say that for Husaberg 390/450/570 FE/FX 09-12, Husqvarna...

Got a kit for my 2012 TE250 today. Installed everything per the directions and it's not working correctly. I have one of the newer kits with the replacement slave cylinder that has an adjustment bolt on it. The problem is, the adjustment bolt never encounters any resistance until it bottoms...

just installed a Rekluse Z start pro to an 09 Berg 450. all is good in the hood but the clutch override isnt really happening, lever has to right against the bar to work, and is awfully light. i only installed one of the bevelled washers on top of the push rod along with the rekluse spacer...

Ok, I've never tried anything but a conventional clutch, but the Rekluse seems to be getting quite the following. I'm to cheap to spend the money first just to see if I like the Rekluse, so I need someone out there to let me ride their bike that has one on it already. Any takers? I'm in...

Does anybody know how to bump start a FE390 with the Rekluse Core EXP? The Rekluse website says it's possible with "adjustments" but provides no instructions on how to do it. :?

apologies mods if this should be under mechanical but figured it's more general as it's how the rekluse exp auto clutch generally affects riding on a 2012 fe570. been a few posts about it but didn't seem to be a general overview thread... there are three different models, budget restricted me...

Hi guys, I'm having problems with my 20 hours old FE570. It has a Rekluse EXP 2.0 which was installed by the dealer in New Zealand. About an hour into my ride on Saturday the bike dissengaged out of gear, then I engaged it again and it dissengaged shortly after and refused to engage in any gear...

Just install rekluse z-start pro on '05 fe 650,work nice,good idle,just a bit of drag at idle but i lowered it and it is ok,there is no slippage while acceleration BUT I HAVE NO MORE CLUTCH COMPLETLY USELESS ... ANY ADVISE i install washer on trow-out and have to install thicker steel plate to...

There has been plenty of discussion about the pros and cons of the Exp compared to the Z start but non about the two Exps. Just thought I'd ask people's opinions on the two and see what peoples experiences were. Whitey

I just won a Rekluse Z-Start Pro Husaberg 450 550 650 2004-2008 RMS-826 on ebag that is new in the box.... this is very convenient becasue my "new to me" Fe450 has a failing squealing clutch. :mrgreen: so, my questions are plenty, of course. will my stock clutch cover work with their...

Hey berg owners! I just installed my new exp 2.0 rekluse. I love it! It seems like it will be a huge advantage in the tight stuff. A couple of questions maybe for anybody that may have a rekluse already. Do you notice a different free-play gain hot vs cold? I get more hot. As the clutch...

Forgive me if I've failed to find this in previous posts.... but, Can someone point me to the correct torques for the clutch cover and "pressure plate" bolts? It's a 2010 FE450 by the way. Thanks.

I found this today, searching around the Rekluse site for upgrade information. They changed the recommended stack position for the EXP. (in July, 2011) http://www.rekluse.com/technical%20bull ... 207-11.pdf

Hi, can anyone tell me how the Recluse exp compares to the z start pro in terms of performance, clutch feel etc? is it any better? I'm thinking of fitting One to my 390. Any thoughts appreciated.

G,day all... Picked up my new bike last week, 2010 FE390....AWESOME!!!! it came fitted with a Z-Start Rekluse, which i am still getting used to. Anyways, i have only done about 4hrs of riding since i got it, but i have noticed something that has made me worry slightly. When its hot, i noticed...

Installed the EXP 2.0 today and went through the brake in procedure. Feels like I've come full circle, back to the 1970 Honda Trail 90 I rode as a fifteen year old kid! Works great and I expect it will work better when it wears in a little. Love it...

The guy I got my clutch from has one more left. If you're in the market, get in touch with him. Here's what he posted on our website at www.vchss.net I have a Exp 2.0 left over.... fits 400/450/530 XC-W/450/530 EXC-----08-11 FE 390/450/570------ 09-11 call for a great deal! (804) 502-2776 cell

I just put a deposit down for my new FE570; hope to have it before the end of May. I am putting together my shopping list of parts so I can set it up promptly and enjoy it asap. One of the first things on the list is a Rekluse clutch: So I am wondering z-start pro (relatively proven) or the...

:?: Hi guys, I'm thinking about an auto-clutch for my '10 FE450. I have never had one before, and I have only a couple of short rides on bikes that have had them. Sooo, I'm looking for some opinions, good points, bad points, etc... I am mostly interested in the "no stall" advantage these...