question

Will a 06 KTM 300xc rear wheel fit a 2012 Husaberg 300te?

Hello Need some advice here So I got a 1997 FE 400 E with the stock VHSB Flatside Carb It starts OK runs Good in upper throlttle pull hard , but with small throttle opening , like just above idle it's rough , hesitades and stumbles , once past this it' rev hard and fast I've cleaned...

Question on value/resale price of a nearly Brand New 2010 Husaberg FX450 Hey guys, I have a question and could use some guidance, I own a 2010 Husaberg FX450. It is nearly brand new, the tires still have the nipples on them. It is at 9.2 Hours and 118 Miles. I have the original body kit...

Hi! Restoring a Husaberg 470 for a friend and having some electrical problems. It doesn't start... So just removed all cables etc to compare with the diagram. I think the previous owner made some own connections or connected something wrong. So anyway, from the Ignition Coil there is some...

I replaced the wheel bearings in them and reused the seals as I did not buy new ones. Now when reassembling the front wheel I can see the bearing is not seated against the fork "dropouts" Is it normal to be able to see some of the black axle on the non-disc side of the front wheel?

Will a sub frame from a 2011 FE570 fit for a 2011 FE390?

So, going in again to change the pump seal and have a question about how deep to send it into the cover. Do I need to only drive the seal until it's flush with the cover, or until it seats against the oil seal? Last time I did this, via 3 seals later, I managed to seat the seal flush with...

Hello My name is Kristian and I'm new to this forum. I have read alot and learned plenty! I just bought a Husaberg FE 450-08 with 120 hours on the clock. The other day I bought a used alu-auxilirytank that fits in the gap behind the rear suspension. I have not mounted it yet but I'm trying...

Hi Guys. I have a husaberg Fe 501 2004. Just wondered what oil to use in my bike. Is synthetic better than semi synthetic? Thanks in advance.

Hi.... I am new to here and also a new husaberg fe 501 2004 owner.... I purchased today ☺ I am new to enduro bike and have come from riding bikes on the roads (GSXR 1000) I wonder if anyone on here could help me.... ?? My husaberg spits coolant out of the overflow at times... is this...

I've spied some wheels on fleaBay and have asked the seller (a KTM dealer) if they would fit my 2011 Husaberg FE390 the reply:- "Hi, we pulled them off a 450exc 13 , which would fit from 2004 model but we cannot be sure which husaberg's they'll fit because we have no part numbers to match up...

Dear all after selling my R80ST scrambler I now think I've seen the light (!) in form of a Husaberg 650 Flat Tracker. That's what I want. So here the questions: I've found one in the UK for £3,500.00 but given that I live in Germany, I suspect I'll run into tedious problems registering it here...

Being dumb as soup can someone please explain why the hour meter on my 390 jumped from 176.3 to 179.6 after a 20 minute ride to work ?? Many thanks Ride safe and often

Hey, I know there are a lot of posts about this but none of them ever answer my question. I have 100% stock exhaust. I think I'm gonna go with the FMF header instead of the Akro because it also includes mid-size. NOW FOR THE MAIN QUESTION: CAN ANYONE TELL ME WHICH MUFFLER/END-CAN IS BUSTER ON...

Turning to you clever husabergians! Quick background, Ive used a pair of boots I liked very much but theyre falling apart. So I had a weak moment of vanity wanting to look proper as the current boots dont look good anymore and bought a set of alpinestars tech 3 (ok dont bash me please...

Hi Everyone, New to the site and would like to thank everyone for the wealth of knowledge that I have gained while trolling. My question is about the readings I have gotten when testing my stator (AMAL/SEM)... BLK - Red reading of 1.756 Ohms BLK - Gr reading of 23.6 Ohms This is...

Hey all, finally got the chance to take my new FE570 out on the weekend and loved it!!! There is some dial on the bars, not sure what it is?? any help would be much appreciated RustyAs

I have a few questions: I have a 2011 FS-570 With a recently rebuilt motor. Top end/ bottom end, the whole damn thing!!:mad: The only thing my mechanic did differently was to make the Throttle Body a little bigger. I also took the bike to the local KTM Dealer and had "the only map they...

I had to remove my clutch basket in order to fix the kick start ratchet return. After putting the basket back in, and rolling the motor over a few times with the kick start, I attempted to set the engine to TDC. This is when I noticed that my alignment point on the idle gear and pinion gear...

Hi there, I bought my Berg new in 2011 and still get excited when I ride it. Such a bad-ass bike. Riden KTMs since 1980 but this bike was/is the pinnacle of performance and quality. Basically stock except for Scotts, Fastway guards, EE skid plate, external ignition map, and 70 deg sub-frame...