question

I bought a Husaberg 470FE 2001 that the previous owner took apart, I am working in the stator and I am having problems with the wiring connection. I have 2 yellow wires and a light blue wire coming from the stator and I am not sure where do they go connected. Any of you have can guide me...

Hi all, new member from Oregon, US, here. I’ve recently purchased a 2005 FE550 and it needs a new kick stand. The stand that was on it was a badly mangled ktm stand. It was in such rough shape I cannot tell if it ever actually fit well, like the factory stand. Unfortunately, I cannot seem to...

Hey guys. Just about to tear into the 570 and I have some questions for you all. I’ll try to keep it short but there’s some history. This thing is a 2009 with 13000 miles on it. It was that way when I bought it and those miles seem like hard-ish ones. I can’t quite tell but there seems to have...

I recently had to replace an intake valve and possibly took more parts off the bike than I needed to in an effort to make my life easier. Just got it reassembled and much to my surprise (Haha) I didn't have any parts left over except for these 2 spacers. 2+ months had passed since when I first...

Quick but honest question: How do you go about adventurer riding your Husaberg with the maintenance needs as as they are? I am a fairly new owner and recently went on a 88 mile, sprited trail/some very fast gravels road/OHV road ride (approx 4 hours of riding). 2008 fe450. My steering stem...

Hi, I have a 2001 fe650. Looking for new chain/axle adjuster blocks as my old ones are modified ktm ones and they look tatty and orange. Seeing as they are no longer available, what do people use instead? I'm after anodised blue or black ones. Will any ktm, husqvana parts fit? I know I...

Hi all, currently fully rebuilding my 01 650 engine as it was using alot of oil, don't want to do it again anytime soon so it's having the full works, re plated liner, new piston, bushes, bearings, the lot. The whole bike is getting the works to be honest, however I've read a fair bit through...

Hi folks, Upon gutting the aftermarket street wiring conversion on my 08' FE 450 in place of a purchased complete factory harness from an 06' SE 650, I found a Trail Tech rectifier that is almost twice the size of mine. So I got a bit excited & jumped into the tub I have the dropped valve 650...

Hi all, I had a dealer convert my husaberg to supermoto for me, and in the invoice they stated a few things which I thought may be concerning. : They left this note: "It is recommended that attention is paid to brakes and suspension. As intended, the factory brakes are designed to deal with...

I got lucky to score a used but decent shape side stand for my FE550. Picked up both springs, bolt, rubber band and C-shaped hook. Can someone please post a pic how it should be installed? Thanks! Christian

thinking about a rekluse clutch for the 2011 FE390. anybody experienced with having these and your opinion. mostly riding trails, probably do hare scrambles, Florida riding mostly flat, sandy. But bike will go on cross country US trip with me for different riding terrain

Hi everyone, I am new to the forum so hopefully i post this in the correct place. I have a Husaberg 650 fe 2003 that i did a oil and filter service on today. I got a little question. I drained the oil and replaced the oil filter, tipped the bike a little over to get all the oil out...

How many gears does the 02' 501 have ? And, is the ignition prone to fail or doesnt put out much ? Easy one for you guys ! lol Thanks in advance ----Proflow

Hi All, really hoping someone can chime in with some advice, I have an 09 FE 570 that has been converted to a snow bike, so lots of full throttle running. In an attempt to get more power I have done the seat mod and added an Akro slip on. Will the stock fuel map be ok? I know there is an O2...

i have an old 02 470 with taffy's FCR jetting pretty much.....and ive got a notion to take it out into the desert around Moab. what do you think my range would be plodding along in 4th gear or so on fire road type terrain? also any ideas where i could source a big tank or an auxiliary tank?

Just sorted clearances on my berg (04 fe450) noticed plug looks a little lean if anything from what i know anyway ? Was just going to turn mixture screw a tad in the right direction, can't remember which say though lol, take a look at pic and see what you think, maybe I'm being too fussy

Husaberg 650 timing question (Solved rooky mistake) Hello i have recently had problems getting the bike to run properly/at all after i removed and reinstalled the cam/cleaning carb etc. Its hard to start and when it fires it only runs with throttle on and easily dies, and also getting pop...

Hey everyone! I'll start by confessing that I'm a Husa-noob, so this might be a stupid question, but I haven't been able to find an answer yet. I just picked the bike up a few days ago, cleaned it up, changed the oil, and started it up to get an idea of what engine seals I'll need to...

Hi all, Sorry if this is a silly question but i'm just unsure because of spindle size etc. I'm looking at getting a set of Warp 9 rims for my 02' 650 but on their site they only do them for 04' onwards, will they still fit? Thanks.

Hello I am looking at the Akrapovic silencer 78105981100 do you know if this will fit a 2011 Husaberg FE570, if it doesn't fit could anyone suggest Akrapovic silencer that will work.