pump

Good evening! I've recently developed a bit of a leak from the weephole on my 99 400fe. I read up a bit on the topic and have gathered that 1 of the 2 seals around the camshaft are leaking. I went ahead and ordered both seals and some other odds and ends for the job. Reading through the factory...

I have a 2005 650 FSC. The water pump impeller has lost two blades. Do you know which impeller fits that? I’ve heard that a lot of KTM parts will fit the Hussa Berg. I’m having a hard time finding parts here in the US.

I am a newbie and have read through every thread I can find on this topic and saw a few YouTube videos. I was so excited to get this bike and before I could even ride it noticed the oil was milky. I have a few questions that have not been answered in the threads I have read and the videos I...

I replaced my fuel pump and did not take a picture of the sending unit hose connections. Can anyone tell me witch of the (2) hose connections on the sending unit the fuel hose with the filter goes on? One connection tube is longer than the other.I Thanks

I'm replacing the fuel pump in my 2011 FS 570. There are grey connectors that 2 pump lines connect with on each end. There are 2 of these grey connectors. They don't come with the CA cycle works fuel pump. Does anyone know what they are called and where to get them? Thanks

I would like to get a high quality spare fuel pump without the high cost of the original. Does anyone have a quality replacement recommendation? Also curious if anyone knows who makes the OE fuel pump and if it's available without OE repackaging.

I have a 2011 fe 450 was running son washed it no no spark no Power to fuel pump Just bought the bike second hand wiring looks to be std mo monster stuff Cheers

I’m stumped. 2010 FE390, getting FI warning 4x long, 1x short which is “fuel pump controller short”. I replaced the relay, tried to reset the ecu by unplugging for 24 hrs. All connections are good. Fuel pump is fine, battery good. What is the fuel pump controller? Are they referring to the relay...

Hello, im interested in buying a water pump cover for my 650 if anyone knows where i could buy one? Mine is cracked and leaking. -Rune

Question for the group: my water pump seal is more than just weaping, it’s leaking about and ounce or more after each ride. Would it be proper to put in a new gasket, or add some gasket sealant to the original gasket and call it good. Thoughts? Sent from my iPhone using Tapatalk

Correct way to install water pump seal Hi everyone, I recently purchased a husaberg fe400e 2002 model. there's a bit of a water leak coming from the wheep hole. The guy before me had done a lot of work to the bike and had actually put a new water pump seal and in, after reading quite a...

@all: 2 covers Gen 1 silver to let because I need Gen 2 Modell 2006-2008 Shipping within Europe preferred. Asking EUR 29,00/pc Cheers

Water pump weep hole dripping coolant while bike on stand after very hot day. Bike not started. Any one else had this. Drip not from radiator over flow tube but from weep hole.

Hi, I have just become the proud owner of a 1997 FE400 which I intend to race in the evo class at vinduro events. I'm in the process of getting it set up but I've just noticed a small hole at the back of the water pump housing. It doesn't appear to be threaded so I'm not sure what it's all...

In need of help locating this relay it seems to be a unicorn..! The bike suddenly stopped after just after starting 1-2min and the error code: Fuel pump relay Prior to determining i've changed fuel filters, spark plugs, and verified all fuses. The fuel pump will prime there is spark because...

Hello, Can someone tell me if I can replace the impeller w/o removing the clutch cover ? Thanks

So i bought my first enduro bike around 2 months ago an fe390 however i have been plagued with injection problems for around 15 of the past 20 hours that I have owned the bike and ive been slowly working out the issues. The injector has been replaced as a precaution(and to give me a spare) and...

2011 FE390, been running hare scrambles all year no problems, ran one last week, bike stalled about 10 times on practice lap, would start again after a few minutes of waiting on side of track. When I bought my bike it appeared original owner did all the preventative stuff for bike's known...

Hi to all, Could someone share the dimensions of the water pump bearing, I am hoping to order the bearing prior to pulling the bike apart. Thank you Ray

There are already several threads about this, kudos to the authors! Just thought Id publish the photos from this session. To change the water seal (ie if coolant is coming out the weep hole) its a fairly small job, it can be done without removing the engine cover, just the housing needs...