problems

Hi, I have recently purchased an 09 fe450 and am experiencing a clutch issue. I previously had a fe501 which I sold a little over 10yrs ago and am just getting back into riding. The problem is that the clutch is dragging alot especially when cold. I have read alot of posts about re-bleeding...

Hey guys I have 2 70° 570s. I recently brought them back from Baja and completely rebuilt them. I didn’t do much motor work except the shims however I took the motors out and cleaned a lot of the electrical connectors and the fuel injectors. I change the start and kill switches to a combined...

I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...

I have a 2010 FE390 with the 70degree tank. The green/blue original fuel line ruptured last week so I replaced it with regular fuel line and reinstalled the check valve as I found it. It also had a shut off valve installed that was partially melted from the exhaust heat so I removed it. Prior to...

Dear members, I'm having trouble with my 2010 Husaberg FE450. I've got the bike for a couple of months now but I'm facing some problems I can't solve... It all started after I washed the bike. The bike started to stall and I've had difficulties to start it again. After I dried the air...

Hello, I just bought a 1999 Fe 600 e The bike is very hard to start. The starter is not currently working. I can get it started about every five tries, each try taking about 5 min. I talked to a ktm mechanic that said the early fe 600s have a problem with the starter failing and the parts...

I picked up this 400 last fall. It was not running and, consequently, cheap but it had motard wheels, complete with cush drive, which my brother has always had an interest in trying on his 550 so I bought the bike. To my surprise, it also had a 41mm Keihin FCR MX on it for an extra bonus. I...

hey all! new to the forum and also a new berg owner. was on a ride today and somthing popped and the bike started to knock. Instantly i shut it off. my first thought was the cam chain tensioner so I am gonna order a new one none the less.. but if I try to start or even crank over the bike a...

Hi im new here, i asked in the facebook husaberg forum how i have to mount the TPS on the bigger ducati throttle. In the facebook forum they said i have to ask tomtom in this forum he can help me? So im searching for tomtom or anybody else out there who can help me thanks.

Hi Guys, Been a long time since i have been in the Husaberg world. i originally bought an Fe 400 2002 around 8 years ago, subsequently blew that up, then replaced the engine with a rebuilt 650 from DCR. thats where the problems start... So the engine came around 6 years ago, and from the off...

Hello guys (Sorry if this is wrong place to post this) But i have a problem and maybe im just too stupid to solve it. My husaberg stalled while i was riding it back home, like there was no gasoline. I Went home and started checking things up. So the startermotor doesnt have any problems...

Hi! This winter I mesured valves and opened and cleaned parts from the ignition. But after that I have problems that I can't solve. When I start the engine it works fine but when it's come up in temperature it goes down in rpm and feels like it has lost power when I give gas. But in higer rpm...

Hey guys having just rebuild my engine and got the thing timed up to a T, i have now found out that the decompression lever on the engine cover on the right side does not return to its original position once the decompression lever has been pulled so that i can kick start the bike as the...

Hello, I'm from Germany and already a member for a while (2015) and reading your posts with interests. I bought a FE 501 model 2002 a while ago. Since I own the bike there's permanent trouble with it. I had it already in a former Husaberg workshop to get the engine fixed (ball bearings...

Hi all, i just recently got myself a 2002 husaberg fe400e and it seems to have troubles starting. when i bought it the guy said that it needed a valve adjustment so i went ahead and did that. after that was done it started on about the 15th kick or so and ran great, lots of power and a very fun...

Good afternoon my friends! I'm writing to ask about something. I have an Mikuni Corp 40 carburetor in my husaberg fe600, im going to buy FCR39, Mikuni is propably one of the problems with my husaberg. Everyday i have to kick it few times <in good moments, generaly it take 10-15 mins - hundreds...

Hello all.. It has been a while since I been on here... Have not done much riding lately as I been busy with kid and moving. I had a chance to take the bike out last weekend and I am now very concerned.... I have noticed (and its a very easy thing to notice) that when I hit approx 60 km...

Hell all, owner of a 1998 FC 501. Anyways, I disassembled the left side engine to fix some sticky shifting issues and ended up removing the clutch basket (damn kick start shaft popped out) and after reassembly, clutch is "sloppy". As in, both my cable adjustments are bottomed out and clutch is...

Hey everyone, I adjusted the valves on my 1994 FC501 today and hooked everything up to try and start it. (I bought this bike in nonrunning condition and haven't had it started) I first put the bike in TDC and verified that the piston was at its highest point with a dial indicator. A mark...

I've been having problems with an 11' FS570. I'm running it as a snowbike. When I get to the trialhead it runs fine. But after riding for a bit. It won't start. It won't even crank. When I flip the kill switch off, I can hear the fuel pump running so I know that part is working fine. But the...