plug

many of the force ride boys will know that i ordered a brisk plug from canada and had it shipped down to splat's for me when i got over. i gave him one of the (minimum order) two and i have waited 7 months to fit mine. zilch. zero. njet! or as we would say-not a sausage! it won't even...

i went on vacation with my **** on THASSOS island 2 weeks ago and i came up with a problem with my fe 600. for 2 days it run great and cool, i covered more than 200 km. the other morning it wouldn't start at all. after about 8 km of heavy duty exercise (kicking for 2 hours-pushing husa until...

I am looking for info on the correct tap/die for the oil plug on a 2001 FC550. Mods Dicks Racing fork/shock mods, (works great). Thanks Jim Ramos (Mars)

Ok, it seems that I cannot start the bike well (or at all) unless I put a brand new spark plug, and then it starts. I inspected the last spark plug, it was greyish. Used wire bruse to clean up, put it back, still did not work. Put a brand new plug and braaam starts in one kick. And this...

just keep an eye out for the little screw on top on your plug, mine was completely worn out and no thread left. i was lucky, i didn't have a misfire but what about when the bike is cold and there is a bit of dew around???? another thing. if you check your service schedules you'll note that...

250 204-01 Inspection plug ignition cover 99- Anyone got any of these??

I've got a 98 FC501. It won't start after running for 20 minutes and I thought it was the magneto, valves or other things. But it does start after sitting for a couple days (4-6 kicks). . It appears the plug is oily and wet and black. The carb settings are probably not well tuned and the...

Anyone used one of these cr8eix plugs in there FE 2002 400/501/600 etc? I have one and am wondering if putting it in will be a bad move i have never used one before. http://www.ngk.com/results_appOther.asp?otherMotiveID=29981&mfid=1

I wanted to get a spark plug for my bike and I came across a few options. I thought I would start a thread and share what I found to make it easier for others. Here are some spark plug numbers I have found for 2002 FE400E Feel free to add other available plug numbers (and comments) for...

what spark plug should i be running in my 00 fe 400e..just taken out the old one and its an NGK D8EA.....the new one i got from the spark plug guy is an NGK(R) DCPR8E..BUT it looks a milimeter or so longer on the electrode /earth ..i don't want to discredit this guys knowledge but i din't want a...

I was removing my oil plug last night (counterclockwise) on my 1998 FC501 and it seemed "stuck", so I gave it a little extra elbow and it came out fine...but only after it broke the pencil-shaped oil screen that sits inside the drain bolt and extends into the case. Since this was my first oil...