plug

Bought a second hand 450 sm just attempted first oil change. Loosend of plug 1 which felt 'locked' up to start and then it just starts spining and trickling a tiny bit of oil. Cant get the thing off or tighten it up, have a bad feeing about this one as the oil screen bolt is also locked...

been out today bike was going well except that every once and a while it wouldn't start. eventualy it just refused point blank to go and just as a mate turns drives past with a van - lucky coincidence - i find that the HT lead connection to the spark plug cap is loose. now, never having...

Is the trailtech DC stator kit a direct plug and play on an 08 husaberg?? there a long post on here about issues somebody had?? I want to buy the kit $169 for the 02-07 rfs bikes , just wondering if the instructions will work and the connections and wire colors are the same...

Anyone experiment with slight variations of spark plug gap from the standard 0.6 mm? The new one I got was around 0.63 or so and I brought it down to exact. Pollo

ok... i got my 06 fe450e, put almost an hour on it and changed the oil. put almost another hour on it, and today went for a long ride, probably about three hours. when i got back i washed her up and dumped the oil. and look what was on the end of my plug!!! i'm craping my pants!!! bike's got...

Does anyone know if a KTM magnetic oil drain plug plug will work on a FE650?, if so which one? A 525xc is a m12x1.5. When i changed my oil Satuday the magnet portion of the plug was just hanging. Any advice?

i appear to have overengineered my old plug wrench i made after giving away my original. i told speaker that i would make him one and after measuring it to cut and weld, i noticed it would be easier just to cut it and drill a couple of holes. it makes it easier to get in and out and also to...

just thought i'd bring this up as a specialist subject to talk of. sparks and i have been chatting and i mentioned that i found out that not all ignitions give a plug colour. so sparks this is what i had on my ducati: i had the standard ducati pantah ignition system of a crank based two...

Hiya Okay, sooo i changed the oil 2 weeks ago saturday (i didn't overtorque the oil drain bolt, made sure of it.)....went for a ride on that sunday....... this weekend i wanted to do a service (oil,oil filters,airfilters,etc.) BUT...the freakin oil drain plug is stuck like a sonafabeech...

Hello, I´m not clear in my mind, how the plug gets his hold in the bore. Only put in like a cork? My friend makes a plug with a inside thread M8, and fitts the screw with a big washer from the inside with the plug. Flat seal instead of o-ring. I have to open my clutch cover by...

hi there what plug and fuel should i run in my 02 501 berg thanks heaps

new husaberg owner here.finding this site superb and very informative.the berg in question is a 2003 fc550 .havent had it long and it has sprung an oil leak from clutch cover[above the kick start] no problem i thought untill went to drain the oil.the sump plug head is completely rounded...

I recently purchased my first MC since 1985; a 2003 fe501e and it runs great, and is a blast. I took it out yesterday for the first time, and rode with some friends. In the Las Vegas Desert. I was told my compression release seal may be leaking a bit, gas is leaking from above the spark plug and...

hi, i have a 02 fe650e and i am thinking about drilling and tapping the motor case to provide an oil drain plug. i know how to change the oil using the side plug, but i am looking to add a faster way. also, the threads on the side plug can really take a beating if you dont clean them...

Hi all First post so go easy please I have a 2002 550 (not sure of the exact model but it dont have estart) I have just spent over 600 english pounds on a rebuild but I have a small problem with the fueling. The plug goes black in a short time. I have cleaned the carb and tank out...

at 150 hours i decided to inspect the sump plug magnet after every ride . i have noticed at the end of the last 2 rides the presence of metal , at today's inspection it told me one thing . REBUILD TIME this 04 FE 650E goes strong , but it is becoming loud mechanically . i...

well dropped the oil on the berg last week and got a shock lots of what looks like bearing material on the sump magnet, small shiny slivers of metal. 8O got to say the bike has had a hard season and a half but the valves are checked ,and its oil dropped every second ride .ive got three good...

Many have asked what should they use to block off the frame opening when doing a breather mod. This is the perfect fit. NAPA Auto Parts part number 660-1696 5/8" / 1.5cm radiator heater hose bypass cap. Two come in a pack :)

I just finished my first valve adjustment (@ about 3.4hrs - '05 FS650E) and took a couple pics of the plug while it was out. I've got very little experience in this sort of thing, and while I *think* it looks normal I figured I'd post the pics up for comments by those with a more discerning eye...

What would be the reasons for my spark plugs getting so dark after each ride, basically? I attached the photo of the plug. I had one ride and then several start attempts yesterday, tinkering with the idle. Basically the bike would start and die after a couple seconds, except once when I...